|
Change History
V4.6.1 (1 Aug 2024)
| • | Fixed analog input 0 not working at times |
V4.6.0 (3 Jul 2024)
| • | [KPro4] Firmware version 26 |
| • | Improved on board datalogging stability |
V4.5.9 (17 Apr 2024)
| • | Improved offline behavior |
V4.5.8 (4 Jan 2024)
| • | Fixed analog input values with conversions |
| • | Fixed V1, V2, V3 MAP sensor display value |
V4.5.7 (5 Dec 2023)
| • | [KPro4] Firmware version 24 |
| • | Bluetooth operation improved |
V4.5.6 (25 May 2023)
| • | [KPro4] Firmware version 22 |
V4.5.5 (8 Mar 2023)
| • | [KPro4] Firmware version 21 |
V4.5.4 (18 Dec 2022)
| • | [KPro4] Firmware version 20 |
| • | [KPro4] Fixed on board datalogging speed |
| • | Fixed some ignition values in idle controlled ignition tables changing between saving / reloading. |
| • | Fixed some lambda values for advanced protection changing between saving / reloading. |
V4.5.3 (22 Sep 2022)
| • | Added support for 'Windows on ARM' |
V4.5.2 (1 Mar 2022)
| • | Better support for screens using scaling of more than 100% (4k monitors) |
| • | Added o2 sensor heaters minimum ECT. |
V4.5.1 (15 Dec 2021)
| • | [KPro4] Added support for KPro types. |
V4.5.0 (20 Oct 2021)
| • | [KPro4] Added support for KPro with new components. |
V4.4.9 (1 Aug 2021)
| • | [KPro4] Firmware version 19 |
| • | [KPro4] Fixed lambda display from AEM 304100 |
| • | [KPro4] Fixed CAN output frequency |
V4.4.8 (20 Jul 2021)
| • | [KPro4] Firmware version 18 |
| • | [KPro4] Added CAN output frequency to parameters |
V4.4.7 (16 Jun 2021)
| • | [KPro4] Firmware version 17 |
| • | Fixed tuning via Bluetooth not connecting. |
| • | [KPro4] Increase CAN output to 100 Hz |
V4.4.6 (11 Mar 2021)
| • | KPro password reset now sends a reset code to the owner email or phone number |
V4.4.5 (28 Jul 2020)
| • | Fixed cam angle high not live tuning correctly. |
V4.4.4 (22 Jul 2020)
| • | [KPro4] Firmware version 16 |
| • | Added AEM 30-0300 wideband. |
V4.4.3 (25 Feb 2020)
| • | Improved datalog scroll speed |
| • | Added help menu link to Hondata Support Forum |
| • | Added MIL, VTS, CL to Hondata and AiM CAN packets |
| • | Added analog + lambda to AiM CAN packets |
| • | Fixed display only ELD lambda input |
| • | Fixed error codes not showing as cleared |
V4.4.2 (10 Jul 2019)
| • | Added button to create default graph templates |
| • | [KPro4] added option to update KPro boot firmware to fix ethanol input problem |
| • | [KPro4] fixed MAP 178 kPa limit in CAN packet 0x662 |
| • | [KPro4] fixed AEM 30-0310 wideband closed loop operation |
V4.4.1 (5 Apr 2019)
| • | Fixed field names not showing for owners details |
V4.4.0 (3 Apr 2019)
| • | Fixed exception on Windows 7 when font scaling was not 100% |
| • | Fixed empty setting combo boxes |
V4.3.8 (26 Mar 2018)
| • | Added tabbed datalogs to the graph window |
V4.3.7 (10 Oct 2018)
| • | [KPro4] fixed advanced protection rpm & map value conversions |
| • | Fixed on board datalog lambda overlay not showing when first downloaded from KPro |
| • | Fixed analog input outputting domain errors with negative voltage offset |
V4.3.6 (23 Aug 2018)
V4.3.5 (13 Feb 2018)
| • | Added language translation with Spanish translation. |
| • | Added AEM 30-0310 and AEM 30-4100 wideband support to analog inputs. |
| • | Fixed datalogged lambda overlay values not using short term fuel trim for adjustment in overlay. |
| • | Added rev limiter sensor to datalogging. |
V4.3.3 (12 Apr 2017)
| • | [KPro4] Firmware version 10 |
| • | [KPro4] Fixed cam angle and target cam angle in CAN output packet 0x664 |
V4.3.2 (28 Oct 2016)
| • | Fixed nitrous ignition problem. |
| • | Split 'Knock / TPS' parameters into 'Knock' and 'Throttle'. |
| • | Fixed staged injection not saving values. |
| • | [KPro4] Added TPS tip in fuel tables. |
| • | [KPro4] Added option to invert the EPS/PSP input. |
V4.2.7 (13 Oct 2016)
| • | Fixed ignition timing going high when multiple nitrous stages were used with large ignition retard values. |
V4.2.6 (10 May 2016)
| • | Running closed loop from an analog input now uses the analog input voltage offset. |
V4.2.5 (11 April 2016)
| • | Added support for the Techedge, Zeitronics, and Innovate LC-2 wideband |
| • | Added support for staged injection for use with the Hondata Injector Driver |
V4.2.3 (12 Jan 2016)
| • | Split 'Fuel Trim' Parameters into 'Fuel Trim' and 'Fuel Injectors' |
V4.2.0 (21 Nov 2015)
| • | [Traction Control] Firmware version 12 |
| • | Added Lotus fuel level min / max voltage. |
| • | [PRA] Removed P0132 error when in open loop. |
| • | Added digital input for wideband table tracing. |
| • | Split Parameters Fuel Trim into Fuel Trim and Fuel Injector tabs |
V4.1.5 (17 August 2015)
| • | USB drivers updated to v1.0.3 (Microsoft Hardware Certified) |
| • | Changed ignition table adjustment so that 'Set Values' applies the same value to all cam angle tables if 'Edit All Tables' is selected. |
| • | Added function selection to nitrous outputs |
| • | Moved Closed Loop Operation to Closed Loop tab. |
| • | [KPro4] Added flex fuel ethanol sensor smoothing and max rpm |
| • | [KPro4] Fixed bug where live tuning would not update when multiple cam angles of the same table were selected. |
| • | [PRA] Fixed idle speed problem with AC or PSP. |
| • | Added analog input conversion for the Delphi 12160855 / AEM 30-2012 fluid temperature sensor. |
V4.0.8 (18 Feb 2015)
| • | Fixed datalog download button not enabling for KPro4 |
V4.0.7 (10 Feb 2015)
| • | Fixed screen scaling for DPI scaling over 150% |
V4.0.6 (9 Jan 2015)
| • | Added VTEC minimum coolant temperature |
| • | Added minimum number of samples for lambda overlay |
| • | Added WOT compensation fixed flag |
| • | Added fuel table deviation display |
| • | Right align numbers in the table and parameter window where possible. |
| • | Added settings option to expand the table window grid to fit the window. |
| • | Added option to auto size the table grid. |
| • | Added ignition controlled idle tables. |
| • | Changed PRB calibration to activate reverse lock out via pin B22 (secondary intake runner). This allows PND ECUs to be used rather than the PRB ECU. |
V3.3.1 (20 Mar 2014)
| • | [Traction Control] Firmware 10 |
V3.3.0 (2 Dec 2013)
| • | Fixed boost control solenoid staying on. |
V3.2.5 (9 May 2013)
| • | Updated USB drivers (Microsoft Windows Hardware Compatibility 2.8.28.0) |
| • | Added calibration revision number. |
| • | Do not display P02 current for PRA datalogs. |
| • | Removed traction control minimum speed parameter (this should be set in the traction control window) |
| • | [Traction Control] Firmware 7 |
| • | [Traction Control] Fixed vehicle speed determination method not showing correctly after update. |
| • | [Traction Control] Prompt to write unsaved Traction Control configuration changes when application closed. |
V3.2.4 (20 Feb 2013)
| • | Added the option to use analog inputs for lambda datalogging. |
V3.2.3 (14 Feb 2013)
| • | Reduced after start VTEC & VTC delay from 10 seconds to 1 second. |
V3.2.2 (20 Dec 2012)
| • | Fixed on board datalogging not downloading recordings when memory full. |
| • | Fixed downloading calibrations from KPro III. |
V3.2.0 (18 Oct 2012)
| • | Improved speed of launch, burnout, shift and overall rev limiters. |
| • | Fixed datalogging of traction control over slip and retard. |
| • | Fixed traction control input descriptions. |
| • | [Traction Control] Firmware 6 |
| • | [Traction Control] Don't start datalogging if the Traction Control is switched off (allows for burnouts). |
V3.1.6 (21 Sep 2012)
| • | Improved Hondata Vault behaviour when searching and downloading files. |
V3.1.5 (18 Sep 2012)
| • | Require registration before Traction Control can be used. |
V3.1.4 (30 August 2012)
| • | Added additional inputs for traction control. |
V3.1.3 (22 August 2012)
| • | Added tool tip window to lambda and fuel overlay. |
V3.1.2 (6 July 2012)
| • | Fixed PNF VTC not working. |
V3.1.1 (9 May 2012)
| • | Added a form to change and create shortcuts. |
| • | Added a test upload function under Online->Tools->Test Upload for performing a test upload in newly installed KPro v3's without having to register them. |
| • | Changed Check For Updates to show current version number and release dates for both beta and production releases. |
| • | Changed the error report so that the user is notified if an issue has been fixed. |
V3.0.3 (11 October 2011)
| • | Improved datalogging/recording performance when display window is maximized. |
| • | Fixed the relative adjustment function for Lambda using AF ratios. |
| • | Fixed launch control max speed range. |
| • | Fixed tabs in the settings window. |
| • | Added automatic conversions to sensor display minimum and maximums, and also sensor warning minimums and maximums. |
| • | Added functionality to save window position with multiple monitors. |
| • | Included security check to prevent saving data to the Program Files directory to avoid virtualization problems with Windows. |
| • | Added Import/Export feature to the Sensor Settings form, the Graph Template form, and main Settings form. |
| • | Added speed correction to the Parameters for under Misc. |
| • | Added a driver check entry to the status bar, a balloon hint to install the driver, and a check box to disable the balloon hint. |
| • | Added 2D graphs to the small tables in the Parameters form. |
| • | Modified the exception report form to directly email reports to Hondata instead of populating users' email service. |
| • | Improved 05-06 speedometer behavior. |
V1.5.1 (14 June 2011)
| • | Fixed uploading for some pre-datalogging systems. |
V1.5.0 (8 June 2011)
| • | Added ELD voltage to datalog export csv file. |
| • | When multiple copies of KManager are run display a message and disable concurrent access to the KPro. |
| • | Added value base color for Parameter tables. |
| • | Added better application exception handling. |
| • | Added Secondary O2 Sensor, Purge System and ELD enable/disable. |
| • | Added datalog trim functions. |
| • | [PRB] - Added target lambda tables. |
| • | Allow injector size over 2000 cc/min. |
| • | Added an option to check for beta version updates. |
| • | Changed wideband input selection to grey out voltage conversion when stock wideband selected. |
| • | Correct pressure display psi unit. (Pressure values shown in psi were incorrectly calculated high by approximately 1.2%. Existing calibrations may show corrected values ~1.2% lower, but the underlying pressure values are unchanged, and the calibration will run identically.) |
| • | Fixed table columns not changing when Options -> Show used. |
| • | Fixed tables showing cam angle other than 0 when VTC is disabled. |
| • | Added Test USB function. |
V1.4.0 (8 February 2010)
| • | Sensor window enhancements (alternating row colors to aid visibility, on/off parameters show as indicators). |
| • | Graph window enhancements (better time axis labeling, ensure sensor labels are always visible). |
| • | Table view enhancements (proportional datalog trace, 2D graph allows drag selection, 2D graph selects rows and columns with Shift and Ctrl clicks). |
| • | Parameters window now scrolls. |
| • | Changed file association to work with Windows Vista / 7 security. |
| • | Added support for Windows Themes. |
V1.3.9 (22 October 2009)
| • | Fixed vacuum unit absolute/atmospheric notation. |
| • | Prevent the entry of negative ignition compensation values. |
| • | Fixed S2000 AP2 final drive gear ratio. |
| • | V1.3.8 (Beta) (1 October 2009) |
| • | Changed ignition tip in retard to fix retard oscillation (removed in V1.4.2). |
V1.3.7 (23 June 2009)
| • | Fixed access violation when downloading or closing a recording. |
V1.3.6 (beta) (15 May 2009)
| • | Added calibration type to Parameters -> Notes. |
| • | Fixed minimum TPS value rounding when negative. |
| • | Change S2000 operation so that they can run with OBDII enabled. |
| • | Removed the requirement to edit the ini file and set DataloggingOutput to enable serial output. |
| • | Fixed 3d graph mouse selection for ignition tables. |
| • | Added narrowband closed loop o2 voltages. |
V1.3.5.4 (20 March 2009)
| • | Fixed cam angle table 3d graph tracing showing load index reversed. |
V1.3.5.3 (15 March 2009)
| • | Fixed 05-06 speedometer showing half speed. |
V1.3.5.1 (13 March 2009)
| • | Fixed AC clutch not engaging (PRB calibration only). |
V1.3.5 (11 March 2009)
| • | Fixed map tracing not working for S2000 calibrations. |
| • | Fixed lambda overlay applying closed loop fuel trims when in open loop. |
| • | Added the option to disable the screen saver when datalogging. |
V1.3.4 (9 December 2008)
| • | Added a lambda overlay option to adjust the lambda overlay lambda value for short and long term fuel trim. |
| • | Added a lambda overlay option to show the lambda overlay for each cam angle table. |
| • | Added a sensor overlay option. |
| • | Added dual adapter harness S2000 and TSX calibrations. |
| • | Changed S2000 AP2 gear final drive ratio to 4.100. |
| • | Changed insert/delete rpm & load index to alter cam angle table as well as ignition & fuel. |
V1.3.2 (20 November 2008)
| • | Added default graph templates. |
V1.3.1 (beta) (31 October 2008)
| • | Added display templates. |
| • | Added calibration comparison. |
| • | Added Winqual certified USB drivers. |
| • | Fixed graph value labels not showing true sensor range. |
V1.3.0 (23 September 2008)
| • | Release of version 1.2.9 (beta) |
V1.2.9 (beta) (26 August 2008)
| • | Added datalog and error code prompts. |
| • | Changed low speed cam rev limit to the same as the high speed cam rev limit. |
| • | Removed VTEC minimum ECT for PRA and PRB calibrations. |
| • | Fixed P0132 error code for S2000/KPro |
| • | Added datalog version number to graph window. |
| • | Simplified Launch Control and Full Throttle Shift parameter organization. |
V1.2.8 (5 August 2008)
| • | Added 5000Hz and 8000Hz warning sounds to the display. |
| • | Fixed lambda overlay display. |
V1.2.6 (1 August 2008)
V1.2.4 (17 July 2008)
| • | Added right mouse button zoom to graphs. |
| • | Fixed sequential shift input invert check mark not updating. |
| • | Fixed launch control / full throttle shift 'always on' input not working for PNF, PRD & PRA calibrations. |
| • | Fixed external wideband input not showing correctly on lambda overlay. |
| • | To automatically start datalogging when KManager is started use a command line parameter of 'datalog' (without the quotes). |
| • | Added injector dead time table. |
| • | Added cranking fuel table. |
V1.2.3.5 (7 May 2008)
| • | Fixed PRA multiplexer not functioning |
V1.2.3.4 (1 May 2008)
| • | Added boost control solenoid minimum and maximum duty cycle. |
| • | Fixed Smooth function only applying to the 0 degree cam angle table. |
| • | Added launch control and full throttle shift. |
| • | Changed S2000 calibrations to use countershaft driven speed sensor by default. |
V1.2.3.3 (26 February 2008)
V1.2.3.2 beta (14 February 2008)
| • | Disabled idle controlled ignition above 1400 rpm. |
| • | Fixed PNF nitrous output not inverting for VSV and 2WBS outputs. |
| • | Added parameter table tracing. |
| • | Added boost control by rpm and gear. |
| • | Changed PRA open/closed loop setting for increased reliability. |
V1.2.3.1 (17 January 2008)
| • | Added scroll bars to the display window. |
V1.2.3.0 beta (20 December 2007)
| • | Enhanced display window. |
| • | Added RDX and Omnipower MAP sensors. |
V1.2.2.9 (25 October 2007)
| • | Added sequential shift cut to PNF,PRA,PND |
| • | Fixed external wideband lambda not showing when datalog re-loaded. |
V1.2.2.8 (23 August 2007)
V1.2.2.7 (10 August 2007)
| • | Added on board datalogging. |
| • | Added maximum knock count for nitrous outputs. |
| • | Added D17 turbo calibration. |
V1.2.2.6 (5 July 2007)
| • | Fixed PNF cam angle control. |
V1.2.2.5 (3 July 2007)
| • | Added third nitrous output. |
| • | Added AC clutch and FANC to nitrous outputs. |
| • | Added fuel and ignition changes by rpm to nitrous outputs |
| • | Removed nitrous fuel ramp and decay settings |
V1.2.2.4 (28 Mar 2007)
| • | Added countershaft driven speed sensor to the PRA calibration. |
| • | Added Windows Vista USB driver install procedure. |
V1.2.2.3 (22 March 2007)
| • | Added ELD as a wideband voltage input for datalogging and display. |
| • | Added wideband voltage/lambda conversion table to Settings . |
| • | Disabling VTC now disables editing of the non 0 degree cam tables. |
| • | Added VIN number to vehicle notes. |
| • | Changed New Calibration so that calibrations are sorted by vehicle rather than ECU. |
| • | Application is now digitally signed by Hondata. |
V1.2.2.2 (18 January 2007)
| • | Fixed problem with non-VTC engines under boost. |
| • | Added the ability to insert & delete table rpm and load indexes. |
| • | Added VTP as a non-multiplex AC switch input. |
| • | Added secondary o2 sensor as a closed loop input (PRA ECU only). |
| • | Clarified TPS range buttons (renamed from 'Set' to 'Read') |
V1.2.2.1 (4 December 2006)
| • | Prevent starting calibrations from being overwritten. |
| • | Allow TPS range scaling. |
| • | Added TPS based table lookup to the PRA ECU. |
| • | When using AlphaN show TPS value on table load lookup. |
| • | Show TPS or MAP value when editing table load columns. |
| • | Prevent use of PSP input for nitrous from increasing the engine idle speed when on. |
| • | Added 'Disable Idle Valve' |
| • | Added fuel enrichment and ignition retard while using the launch limiter. |
V1.2.2.0 (16 October 2006)
| • | Added RevHard calibration for the Civic Si |
| • | Improved copy and paste between parameter tables. |
V1.2.1.9 (11 September 2006)
| • | Fixed problem where nitrous output settings were not always saved. |
| • | For the PRB ECU TPS is now datalogged when the engine is not running. |
| • | Improved datalogging memory management. |
V1.2.1.8 (July 2006)
| • | Added an USB test function to the help menu. |
V1.2.1.7 (June 2006)
| • | Fixed problem where PRA ECU would not go into open loop when closed loop was disabled. |
| • | Added automatic update check. |
| • | Increase VSS output smoothing. |
V1.2.1.6 (26 May 2006)
| • | Improved data integrity when downloading from the ECU which was uploaded with an old KManager version |
| • | Allow KManager and SManager to connect to ECUs simultaneously |
| • | Fixed datalogging problem when VTC is disabled |
| • | Fixed nitrous operation on PNF ECU |
| • | Added tip in ignition retard control to PNF ECU |
| • | Added option to disable the idle valve for ITBs (PRB ECU only) |
V1.2.1.5 (9 Mar 2006)
| • | Re-release of 1.2.1.4 beta |
V1.2.1.4 (1 Mar 2006)
| • | Added TPS ignition retard to the PRA ECU |
| • | Added overrun cutoff to the PRA ECU |
| • | Added the option to show 5 bar columns |
| • | Added speed sensor output for PND ECU |
V1.2.1.3 (3 Feb 2006)
| • | Fixed 2d & 3d graphs not showing the table selection |
| • | Added target idle lambda to the PNF and PND ECU |
| • | Added countershaft driven speed sensor to the PND ECU |
| • | Increased o2 sensor internal resistance error threshold from 40 to 50 ohms (P0134 DTC) |
| • | Added TPS ignition retard to the PND ECU |
V1.2.1.2
| • | Fixed problem saving OBDII status with PRA calibrations |
V1.2.1.1
| • | Fixed problem loading PNF, PND & PRA calibrations |
V1.2.1.0
| • | Increased o2 sensor maximum resistance for P0134 error check |
| • | Smoothed speed output for 05 RSX |
| • | Added brakes, gear and boost duty cycle to datalog export |
| • | Fixed problem with PNF boost by gear |
V1.2.0.9
| • | Improved datalogging speed |
| • | Added additional MAP sensor details |
| • | Added 'Smooth Selection' function for tables |
| • | Added secondary o2 sensor to datalog export |
V1.2.0.8
| • | Fixed PNF incorrect cam angles |
| • | Fixed boost control on PRA ECUs |
V1.2.0.7
| • | Fixed gear correction ignition advance |
| • | Fixed overrun cutoff not saving |
V1.2.0.6
| • | Added boost control output (stage 1) |
| • | Added gear fuel & ignition correction |
V1.2.0.5
| • | Fixed P1607 error for PNF-A12 and PNF-A13 ECUs |
V1.2.0.3
| • | Added minimum and maximum short term fuel trim settings. |
| • | Split the 'Show Boost Tables' option into two options (for stock and 3 bar MAP sensors) |
| • | Double clicking in the sensor window brings up the Sensor Setup window. |
| • | Expanded the minimum o2 sensor lambda from 11.48:1 to 10.70:1 |
| • | Added second nitrous output |
V1.2.0.2
| • | Added radiator fan temperature |
| • | Added speed sensor conversion for the 2005 RSX with a countershaft driven speed sensor. |
| • | Added minimum speed for VTEC. |
| • | Added option to disable the speed sensor. |
| • | Added TPS based table lookup. |
| • | Added navigation keys to the graph window |
V1.2.0.1
| • | Fixed rpm and load index changes not re-loading. |
V1.2.0
| • | Changed air temperature compensation so that the index (temperature) can be altered. |
| • | Added a slider to change the idle valve duty cycle feedback proportional adjustment. |
| • | Added drag and drop for datalogging recordings. |
| • | Load and rpm indices may now be edited. |
| • | Table columns and rows may be selected by clicking on the topmost row or leftmost column. |
| • | Added window buttons to the toolbar. |
| • | Added calibrations (TSX with JRSC, RSX with Toda headers, RSX with ITBs, RSX with Crower Stage 2 cams) |
| • | Added individual buttons on the Table Window toolbar for selecting tables. |
| • | Added a log file for troubleshooting purposes. |
V1.1.9
| • | Fixed PNF (US Civic Si) starting & datalogging issue |
V1.1.8
| • | Added lambda overlay display |
V1.1.7
| • | Added idle target lambda |
| • | Added USB drivers for PIDs 6001 and 6006 |
V1.1.6
| • | Fixed PNF (US Civic Si) starting issue |
V1.1.5
| • | Added a command to reinstall the USB driver (on the help menu) |
| • | Added a shift cut for sequential transmissions |
| • | Fixed print function for datalog graphs and ECU tables |
V1.1.4
| • | Added the option to disable error P0341 (camshaft range/performance) |
| • | Added the option to invert the nitrous arming switch. |
| • | Added the option to disable engine cold ignition retard. |
| • | Upgraded USB drivers to 1.6.20 |
V1.1.3
| • | Fixed non-stock MAP sensor information not saving in calibration. |
| • | Added TSX, Si JRSC and Si Greddy calibrations. |
V1.1.2
| • | Fixed division by zero error when switching off the engine and datalogging. |
| • | Removed target A/F atmospheric pressure compensation at full engine load. |
V1.1.1
| • | Initialized high boost portion of calibrations. |
| • | Fixed 16-28 lb boost portion of base and Civic calibrations not being displayed. |
V1.1
| • | Added support for non-stock MAP sensors. |
| • | Improved the upload algorithm which detects which parts of the ECU memory needs to be re-written during an upload. |
| • | Fixed knock threshold not datalogging for PND ECUs |
V1.0.18
| • | Fixed help->contents crashing application |
| • | Change boost cut so that it is removed when engine speed drops below 2000 rpm or the throttle is released (previously rpm and MAP was used) |
| • | Removed used options (some units, display size). |
| • | Added engine overheating protection. |
| • | Added the option to disable iVTEC |
| • | Prevent the use of % symbols in the notes field. |
| • | Validate air temperature compensation when loading calibration. |
| • | Added two cybernation calibrations. |
V1.0.17
| • | Make sure update file is created in the correct directory |
| • | Force the use of a comma as the list separator and dot as the decimal point to prevent European language users from generating an error when loading calibrations. |
| • | Fixed problem in display window where injector duration would not display |
| • | Fixed missing help file problem |
| • | Fixed idle speed glitch. |
V1.0.16
| • | Update ECU type every upload |
V1.0.15
| • | Remove fuel correction when switching to open loop under high load |
| • | Added European Civic Type R support |
| • | Added stock K24 Accord calibration (using PNF Civic Si ECU) |
V1.0.14
| • | Improved datalogging speed |
| • | Added an error message for errors while uploading |
V1.0.13
| • | Added the option to disable the secondary intake runner control on base RSX (PND) ECUs |
| • | Added support for the US Civic Si |
| • | Fixed problem with highlight area on 2D ignition tables while datalogging |
| • | Added the command the export datalog files. |
| • | Fixed problem where current field in parameters window was not saved before upload. |
V1.0.12
| • | Added support for the US base RSX |
| • | Add Close command to the Datalog menu |
| • | Fixed use of numeric keypad, negative and period keys in tables. |
| • | Changed hot keys for datalog and record to F10 & F9 respectively. |
V1.0.11
| • | Altered intake air temperature compensation |
| • | Added nitrous status to datalog sensors |
V1.0.10
| • | Fixed injector duration showing over 100% duty cycle |
| • | Added new pressure unit to display inches vacuum and psi boost |
| • | Added launch rev limiter |
V1.0.9
| • | Added download calibration command. |
| • | Changed nitrous control so that fuel may be removed and ignition advanced (for alcohol injection). |
| • | Stop datalogging / recording when ignition switched off. |
| • | Fixed index out of range error. |
| • | Added calibration description. |
V1.0.8
| • | Added the option to disable the fuel over-run cutoff delay. |
V1.0.7
| • | Fixed idle speed not saving in calibration |
| • | Fixed disable P0134 not saving in calibration |
V1.0.6
| • | Fixed datalog resolution problem |
V1.0.5
| • | Added the option to disable error P0134 |
| • | Fixed problem where OBDII scan tools could not communicate |
V1.0.4.13
| • | Updated JRSC 440 & 550 calibrations and Rev Hard calibration |
| • | Corrected nitrous input & output descriptions |
V1.0.3.12
| • | Added the option to switch to open loop above a certain MAP |
V1.0.2.11
| • | Added the option to disable error P1167 |
| • | Added the option to flash the MIL when knock detected |
V1.0.1.10
| • | Added some calibrations. |
| • | Added option for the table to follow VTEC and the cam angle. |
V1.0.0.9
| • | Added context sensitive help |
V1.0.0.8
| • | Added drag & drop to open calibration files. |
| • | Added association to open calibration and recordings from Windows Explorer. |
| • | Added Create Forced Induction Tables form. |
| • | Changed calibration extension from .kcd to .kal |
| • | Enabled fuel system status |
V1.0.0.6
| • | Added option to disable VTEC oil pressure |
|