Page 1 of 1
Red light by datalog port.
Posted: Fri Aug 14, 2009 5:51 pm
by boostedpumpkin
my red light comes on while driving. i cant pin point it to a specific cause but it doesnt seem to affect how the car runs. i have checked with my laptop and has no codes. it doesnt ever come on consistantly like at vtec or full boost or anything i can figure out. this is while not datalogging. i am using the newest version,i checked for updates as soon as i put my ecu in and hooked my laptop up. anyone know what it might be?
thanks
john
Posted: Mon Aug 17, 2009 9:22 am
by Spunkster
In your calibration do you have on-board datalogging enabled?
Posted: Mon Aug 17, 2009 1:57 pm
by boostedpumpkin
yes. today on the way home from work the light came on at full boost but it doesnt always come on then and it will go out on its own sometimes and sometimes stays on. im baffled.
Posted: Mon Aug 17, 2009 2:14 pm
by Spunkster
Turn off on-board datalogging
Posted: Mon Aug 17, 2009 11:48 pm
by Jaker
Is on board datalogging working properly with any of the most recent software releases?
Posted: Tue Aug 18, 2009 9:17 am
by Spunkster
It works fine, but many people have it turned on thinking it must be turned on in able to be able to datalog using the laptop, and it does not need to be enabled.
Posted: Tue Aug 18, 2009 2:43 pm
by boostedpumpkin
ill try that.
thanks
Posted: Tue Aug 18, 2009 4:25 pm
by boostedpumpkin
problem fixed. thank you very much.