Page 1 of 1
Cant upload on to S300. Please Help
Posted: Wed Aug 12, 2009 10:32 am
by darren
Noob question here.
When i try and upload a calibration on to my ecu it comes up with 'error' :?
It says its 'online' in the bottom left corner, so not sure what to do.
Any help would be great
Posted: Fri Dec 25, 2009 12:32 am
by ls/vtec
I'm on the same boat. any help?
Posted: Sat Dec 26, 2009 11:20 am
by pvt_awol
this had me stumped for months when I first got my S300 years ago. It doesn't say anywhere that you have to do this, I just guess that people have to know it.
Anyway, try this:
whatever ECU you have socketed is the basemap you need to start with. For instance, you cannot upload the stock P72 basemap to a P28 ecu. What you have to do is, copy the tables and parameters from the P72 map, and paste them into the P28 map (or whatever ECU you are using)
I'm not sure why this is, but it gave me a headache for weeks, until I finally talked to someone at Hondata over the phone. They got me straightened out in a matter of minutes. I'm not saying that this is your problem, but it is something to try.
Posted: Sun Dec 27, 2009 1:01 pm
by ls/vtec
its seems odd thing to do as I had a S300 previously and it never did that but Im definitely gonna give your opinion a go. Thanks
Posted: Mon Jan 04, 2010 12:16 pm
by Spunkster
This is not correct. You should be able to start from any of the calibrations in the list when you click on "New Calibration". Always make sure you are using the most recent version of software downloaded from our website.
pvt_awol wrote:this had me stumped for months when I first got my S300 years ago. It doesn't say anywhere that you have to do this, I just guess that people have to know it.
Anyway, try this:
whatever ECU you have socketed is the basemap you need to start with. For instance, you cannot upload the stock P72 basemap to a P28 ecu. What you have to do is, copy the tables and parameters from the P72 map, and paste them into the P28 map (or whatever ECU you are using)
I'm not sure why this is, but it gave me a headache for weeks, until I finally talked to someone at Hondata over the phone. They got me straightened out in a matter of minutes. I'm not saying that this is your problem, but it is something to try.
Posted: Thu Jan 07, 2010 7:14 pm
by ls/vtec
Im defintitely using the latest version from the website. tried multiple laptops aswell
Posted: Fri Jan 08, 2010 10:32 am
by Spunkster
who socketed the ECU?
Posted: Fri Jan 08, 2010 1:23 pm
by ls/vtec
Spunkster wrote:who socketed the ECU?
Speedfactor New Zealand