Cranny, Need Help with Datalog Please!
Posted: Mon Aug 10, 2009 1:27 pm
So I got my Kpro in today, loaded up a starter kal and went on my way.
I noticed throughout much of my run that my IATs were ~140.
For this reason the built in ign. retard in KPro kept lowering my WOT timing.
Because of this, everytime I would go from high load->low or low->high and it had to be compensated, it would show as a knock on Kpro, almost everytime.
I attached my map with the changes I made (I accidently saved over the original) and the datalog can be downloaded here
http://www.speedyshare.com/548661430.html
The forums kept giving me an error when I tried to upload the datalog.
I apologize that it is 26 minutes long. Good thing there is a Zoom Feature!
Thanks,
Tim
I noticed throughout much of my run that my IATs were ~140.
For this reason the built in ign. retard in KPro kept lowering my WOT timing.
Because of this, everytime I would go from high load->low or low->high and it had to be compensated, it would show as a knock on Kpro, almost everytime.
I attached my map with the changes I made (I accidently saved over the original) and the datalog can be downloaded here
http://www.speedyshare.com/548661430.html
The forums kept giving me an error when I tried to upload the datalog.
I apologize that it is 26 minutes long. Good thing there is a Zoom Feature!
Thanks,
Tim