Hondata

Posted: **Wed Jul 29, 2009 5:48 am**

Hello,

Yesterday I finished to tune my 1st Civic Type R FN2, I use only MAP sensor.

Civic Type R FN2 with just a "Injen" similar CAI.

Here I found the good Ignition for 40° cam with a AF between 12.6 and 13.1:1

Stock Vs Menfou's calibration.
Between 6000 and 7000rpm the gap is no important because in the stock calibration I had 30°vtc and the Ignition is very similar to the best Ignition I found.

Civic Type R FN2 with Toda Header, Toda exhaust, Spoon TB, RRC
The calibration is not finished for moment, I think +5hp more in the final.

Posted: **Wed Jul 29, 2009 6:48 am**

So how much hp , was with the Toda setup, Spoon TB and RRC ?
Are those to the wheels or flywheel ?

Posted: **Wed Jul 29, 2009 10:59 am**

what software is that?

Posted: **Wed Jul 29, 2009 12:31 pm**

It's my software.

The installer is here http://flaget.free.fr/software/CTRTEAM.msi

And the last version of the exe file is here http://flaget.free.fr/software/CTRTEAM.exe

Posted: **Wed Jul 29, 2009 1:34 pm**

thanks
how do you use it?
is there any any help file?

Posted: **Thu Jul 30, 2009 1:31 pm**

Ok I'll repeat my question , are those gains to the wheel ? (i.e. the Toda setup)

Posted: **Thu Jul 30, 2009 2:21 pm**

I finished the Civic Type R FN2 with Toda Header+exhaust+RRC+CAI+Spoon TB

I compare this Civic Type R FN2 "toda" with a Civic Type R FN2 with only a CAI

It's hp on the engine calculate.

Posted: **Fri Jul 31, 2009 8:55 am**

Shouldn't you put more hp with all those mods ?
With simial mods like yours and Hondata ECU I've seen 225-230 hp , or is ths relative to te dyno ?

Hondata

My first 2 Civic FN2

My first 2 Civic FN2