tsx k pro calibration idle
Posted: Sun Jul 19, 2009 5:12 pm
I just finished installing the dual adaptor in my 2004 tsx.I started the car and let it come up to temperature before driving it for the first time.
The idle coming to a stop in neutral drops to 400-500 rpm.
When the air conditioning is engaged it drops lower to the point the car stalls.I decided to make a drive to the highway I encountered some traffic and came to a dead stop. The car stalled ! Note that i drove it very normally never exceeding the 3000 rpm point cause I do not know what to expect next from the car.
I would like to know the calibration that came in the k pro is okay ?
or should I use the other stock 04-05.kal instead.The car is completely stock.
thank-you
The idle coming to a stop in neutral drops to 400-500 rpm.
When the air conditioning is engaged it drops lower to the point the car stalls.I decided to make a drive to the highway I encountered some traffic and came to a dead stop. The car stalled ! Note that i drove it very normally never exceeding the 3000 rpm point cause I do not know what to expect next from the car.
I would like to know the calibration that came in the k pro is okay ?
or should I use the other stock 04-05.kal instead.The car is completely stock.
thank-you