Hondata

Posted: **Wed Jul 08, 2009 2:39 pm**

I was about to map my newly boosted 91 Accord CB7 yesterday.. plugged in my new hondata in p06 ecu.. my car is obd1, so that is right..

i uploaded the map, but i get a engine check light... the hondata doesnt datalog, nothing happens in the smanager.. no errorcodes, nothing happens when i changes things in smanager and upload them.. what can be wrong?

i have precision 580cc injectors, peak&hold.. i have tried other computers.. nothing changes.. it is just the tuning left on my build, this is anoying.. any help please??

Posted: **Wed Jul 08, 2009 3:11 pm**

From Help, About, what is the version of software you are using?

Posted: **Wed Jul 08, 2009 3:24 pm**

newest.. dowloaded the newest software from hondata.com.. 1.4.1.0

Posted: **Wed Jul 08, 2009 5:46 pm**

Make sure that the s300 is seated properly on all the pins, as it sounds like it may not be on all of them, or you may not have J12 cut.

Posted: **Wed Jul 08, 2009 11:15 pm**

j12 cut? what is that? i bought the ecu with hondata in finnish from the dealer.. i havent done anything.. so.. i have a edm 91 accord.. obd1, with engine kode f22..

Posted: **Thu Jul 09, 2009 11:02 am**

what to do?? thought the p06 ecu should fit in my car.. have the cel on all the time, cant read out the error code, and nothing happens in the smanager when datalogging..

Posted: **Thu Jul 09, 2009 11:35 am**

What does the sticker on the side of the ecu say?

Posted: **Thu Jul 09, 2009 3:44 pm**

will check tomorrow..

Posted: **Fri Jul 10, 2009 8:33 am**

37820-P06-A02
740-781257

Posted: **Fri Jul 10, 2009 9:40 am**

Contact the dealer you purchased this from as it sounds like either the ECU was not socketed correctly, or you were sold a damaged ECU.

Posted: **Sat Jul 11, 2009 4:48 am**

but i tried a p06 without hondata, it is still the same constant cel.. so.. does p06 really fitt my car??

Hondata

MY NEW S300 doesnt work right

MY NEW S300 doesnt work right