Page 1 of 1
raised compression over 12:1.
Posted: Mon Jul 06, 2009 3:28 pm
by silverspoon1996
Is it possible to get a basemap for higher compression?? I am knocking off idle and cant figure it out.
Posted: Mon Jul 06, 2009 4:11 pm
by Garrett_si
you need tu adjust the calibration
increase duty cycle, and reduce ignition timing
Posted: Mon Jul 06, 2009 5:17 pm
by silverspoon1996
That sounds all fine but im not a tuner, I am just looking for a basemap to drive to the tuner. As of right now im using the race map on map setting for the K&N v2 and RH. I am going to attach my datalog so someone can take a look it breaks up in first gear and has a hessitation around 3000 rpm.
Posted: Sun Jul 12, 2009 4:04 am
by silverspoon1996
I figured out part of the problem... I was 2 quarts low on oil from all the revving I had been doing lately... It fixed the hesitation. I am still however getting up to 6 degrees knock retard.
Posted: Wed Dec 16, 2009 11:32 am
by k20z3si4dr
silverspoon1996 wrote:I am still however getting up to 6 degrees knock retard.
thats why you do what garrett si told you to do.