Verification of ECU usage...
Posted: Wed May 27, 2009 5:39 pm
Doug and co., I just want to verify if the ECU I have in my possession will be able to be utilized for KPro for my '07 S2000. In the past, I had KPro in my old DC5R when I lived in Japan and my daughterboard fried twice before so I purchased a new/used ECU from a seller in Japan. I was told at that time that the ECU could be KPro'd it would just not have all features available. The ECU in question is a PRC-J01, the 5R Integra ECU which has an immoblizer unlike the previous 2 PRC ECUs in the non face-lifted Integras.
So basically I know the nitrous ability is nil with the PRC type of ECUs, not a concern for me at all as I would never use it anyways, but I'm just worried if the immobilizer can be bypassed to be able to be used as the KPro ECU in my S2000.
I will be arriving stateside this coming Saturday for a company conference and then also another week of vacation and would really like to get this ECU KPro'd and my current flashed ECU changed up to work in conjunction with the other ECU. And basically the only other thing I should need if doable is the primary 02 sensor from the RSX-S or an aftermarket one used as a replacement, correct?
I've scoured over the KPro area of your site, but it makes no mention of the different PRC ECUs which gives me a small hope and the fact that I received an email from Doug long back stating that the J01 is Kproable. Just uncertain if it will definitely work in the S2000 application.
Looking forward to hearing back good news as I don't really want to spend the extra $500~600 to get a brand new PRB ECU when I spent $400 on this ECU in the past and it is just a dust catcher right now. :)
So basically I know the nitrous ability is nil with the PRC type of ECUs, not a concern for me at all as I would never use it anyways, but I'm just worried if the immobilizer can be bypassed to be able to be used as the KPro ECU in my S2000.
I will be arriving stateside this coming Saturday for a company conference and then also another week of vacation and would really like to get this ECU KPro'd and my current flashed ECU changed up to work in conjunction with the other ECU. And basically the only other thing I should need if doable is the primary 02 sensor from the RSX-S or an aftermarket one used as a replacement, correct?
I've scoured over the KPro area of your site, but it makes no mention of the different PRC ECUs which gives me a small hope and the fact that I received an email from Doug long back stating that the J01 is Kproable. Just uncertain if it will definitely work in the S2000 application.
Looking forward to hearing back good news as I don't really want to spend the extra $500~600 to get a brand new PRB ECU when I spent $400 on this ECU in the past and it is just a dust catcher right now. :)