Hondata

Posted: **Wed Apr 15, 2009 8:18 pm**

new to tuning and i just had a quick question.

when tuning, does the wideband have to be "connected" as an analog input or can i just tune using the O2 as an independent wideband.

Posted: **Wed Apr 15, 2009 11:32 pm**

It can be independent. You can either have the wideband controller simulate a narrow band signal to your ECU or just keep your stock O2 sensor hooked up if you got 2 O2 bungs in your car.

Posted: **Thu Apr 16, 2009 8:36 am**

so during tuning, just go off of what the wideband displays? for datalogging i WOULD need to have it as an input to the ECU correct?

Posted: **Thu Apr 16, 2009 9:13 am**

http://www.hondata.com/techplxwiring.html

Posted: **Thu Apr 16, 2009 9:25 am**

Ok, if you want to have your wideband readout in hondata use one of the inputs available in the "closed loop" tab under parameters. Go here:

http://www.hondata.com/techplxwiring.html

Posted: **Thu Apr 16, 2009 2:19 pm**

ah, thanks guys. as far as the adaptor piece goes, i wouldn't need it unless i didn't want code 41 correct?

Hondata

wideband analog input.

wideband analog input.

Re: wideband analog input.