Hondata

I just got my P28 ecu back from getting the s100 installed(It was formerly chipped with the skunk2 program). When I opened the ECU the S100 was freely moving around, it looks like it had come off a white 4 pin connector. The S100 chip has 8 female plugs on it labeled 1-8, which 4 out of the 8 on the s100 chip plug into the 4 pin connector on the ecu 1-8?
thanks


THE WHITE 4 PIN CONNECTOR AT THE TOP MIDDLE

With the S100 label upside down the connectors thould be leaning toward the left side. The left most portion is number 1.

After tuning I suggest the you put some hot melt glue on your S100. Just to be sure it doesn't come off while driving.

thanks for the reply !!!:D