Page 1 of 1
Wideband Question...
Posted: Tue Mar 24, 2009 3:04 pm
by MatioBarton
can i use any of these as a wideband in my ek...
Bosch PN 15733 (not sure if this is wideband at all)
Bosch PN 17014 (vw bug 6 wire)
NGK PN 24302
thanks.
PS I searched the forums and didnt find anything.
RW
Posted: Tue Mar 24, 2009 3:25 pm
by Spunkster
No, a wideband sensor alone will not work. You must use a complete wideband and controller. We recommend the PLX devices widebands.
Posted: Tue Mar 24, 2009 4:20 pm
by cranny
PLX are the bomb for sure. being able to mimic the stock primary O2 as well as be a wideband sensor is awesome.
Posted: Tue Mar 24, 2009 6:32 pm
by FreshDA9
cranny wrote:PLX are the bomb for sure. being able to mimic the stock primary O2 as well as be a wideband sensor is awesome.
X2 i love my DM-5
Posted: Wed Mar 25, 2009 5:48 am
by MatioBarton
thanks, ill look into getting one, i just wasnt sure, new to tuning, not new to honda. lol, does any of u know the area of the site where i could find directions on hooking up an aem uego to my s300? i was looking at getting one of them.
Posted: Wed Mar 25, 2009 9:31 pm
by locash
That's funny, Spunkster, I was recommended to buy the Motec PLM, and I can guarantee it is significantly better than the PLX. :) As a matter of fact, I bought mine from Hondata!
Posted: Thu Mar 26, 2009 9:12 am
by Spunkster
Joe that was over 7 years ago. <shaking head> I'll bet it didn't cost anything near what the PLX costs either???
Posted: Thu Mar 26, 2009 10:07 am
by locash
7+ years or not, its still a better unit. :) Oh, and it was cheap compared to the prices on them now!
Will the plx control an NTK or a bosch 4.9 sensor? I haven't looked at them lately..
Posted: Thu Mar 26, 2009 11:14 am
by Spunkster
All current PLX widebands use a Bosch sensor. Only some of the very early units used an NTK sensor.
Posted: Thu Mar 26, 2009 1:07 pm
by MatioBarton
lol. ok, ill go back in time and buy one when u got urs. lol. btw spunk, love the avatar. JADE!!!!!!!!!!!!!!!!!!!
Posted: Tue Mar 31, 2009 9:32 pm
by CK4500
MatioBarton wrote:thanks, ill look into getting one, i just wasnt sure, new to tuning, not new to honda. lol, does any of u know the area of the site where i could find directions on hooking up an aem uego to my s300? i was looking at getting one of them.
I too would like an answer to this question. I've looked at the help info that came with my SManager, and I see the photos where is says to remove r3 annd r2.....etc. Has anyone else done this?
Posted: Tue Mar 31, 2009 10:23 pm
by V-Spec race development
I have and I still can't get the a/f right. the datalog shows a 15.7 a/f but my aem shows 14.7
Posted: Sun Apr 05, 2009 2:12 pm
by Garrett_si
AFM1000 is the best wideband on earth, it's use by the automotive industry to tune and develop cars (use a L2H2 sensor)
NGK AFX with L2H2 is the second best
after that PLX with NTK sensor (L2H2 or L1H1)
Posted: Mon Apr 06, 2009 11:17 am
by crucian
Love my Zeitronix. Got mine with the display, boost, and EGT. Great datalogging software!