Hondata

Let me know what you think.

Your running lean dude. Quite lean in fact at some points.

wowsers , haha. holy lean batman. are you running the ITR map? man your car has alot more to offer wih a few datalogs and adjustments.

ya i am running the ITR map from Hondata. I made some changes and have yet to do another datalog. One question i do have is...Is it better to datalog in open loop or to let the ECU handle all of that?

if your tuning WOT only , leaving it in closed loop is fine. if your part thottle tuning , must be in open loop.

thanks for your help cranny... really appreciate it. I think I'm gonna try increasing fuel in 1% increments pretty much across the board and see where that gets me. Do you think thats a good starting point?

Not really,

Use the lambda overlay if your not sure what your doing.

just post a datalog and lets have a look see.

Also my car runs at WOT in column 7, when i make changes do i need to be making changes to column 7 only or do i need to be changing columns 6 through 9?

you need to post your fuel map as well buddy.

Here is another datalog. Things look to be getting better... Still some crazy spots. Any suggestions or help would be great.

your not getting wide open throttle for one reason or another. couldnt tell you why. your tps says its getting full but the map dont.

try this one

Do you think the elevation im at would have anything to do with the map not getting up into the higher columns?

that question has been answered for you. didyou upload the calibration i gave you? post up another datalog.

cranny wrote:that question has been answered for you. didyou upload the calibration i gave you? post up another datalog.

When was my question answered?