Page 1 of 1
Temp sensor & AC is not working????
Posted: Thu Mar 12, 2009 1:57 pm
by pwpdc5
Hey i plugged in the kpro for my 05-06 rsx-s and my temp sensor in the car does not work. Also the AC condenser does not turn on to blow out cold air.. i double checked and plugged back in my old ecu and everything works fine. please help me out, thanks
Posted: Thu Mar 12, 2009 2:14 pm
by Spunkster
You have the multiplexer disabled. You must set it to normal operation and upload the calibration.
Posted: Thu Mar 12, 2009 3:34 pm
by pwpdc5
Thanks.. I got my temp sensor to work but now kmanager says readiness code ac refrigerent not supported...
Posted: Thu Mar 12, 2009 4:57 pm
by Spunkster
Ignore the readiness codes, they mean nothing.
Posted: Fri Mar 13, 2009 5:12 am
by pwpdc5
Yea but what causes my a/c compressor not to kick on?? It's not the compressor since I have plugged in the stock ecu like 5 times already just to have some a/c... All the wires on the harness seem to be perfect.
I didn't spend $1500 to have no a/c...
Posted: Fri Mar 13, 2009 7:38 am
by Hondata
Please follow the posting guidelines and provide the calibration you are using and a datalog.
Posted: Fri Mar 13, 2009 9:45 am
by pwpdc5
The calibration is the first one u have on kmanager for the k20z1 and what type of datalog u need? Doesn't it matter if I give you one on idle?
Posted: Fri Mar 13, 2009 11:51 am
by Hondata
There is a bug the AC in V1.3.5. Update to 1.3.5.1 and upload again.