Hondata

If you look through the datalog I have attached you will see that the a/f values in the sensors window and graph window match. However, the lambda values on the lambda overlay in the tables window read way rich compared to the other windows. Is there a problem here? The datalog is from the k20a2 cai tuned kal.

I really like the feature of the lambda overlays showing values per cam table, very nice feature.

uncledan

It is because there is a -7.8% long term fuel trim. If you uncheck 'in closed loop apply fuel trims' then the values are as expected.

This is a bug - the fuel trims should only be applied in closed loop, not open loop. I'll fix it for the next release, which should be soon.

Thanks for the quick response, that fixed it.

Any chance in the next release that you could include an idicator for the display window for vtp/vts? I would like to see on the display when I am I am on the high cam.

uncledan

Eventually.