Hondata

Hi all im in need of a good running map for a h22a 550cc injectors at 10psi

stock fuel pump? what all is done , everything.

255 walbro fuel pump, all internals been upgraded apart from camshaft and crankshaft

do you have a wideband gauge and sensor and is it wired into S300? what map sensor you running?

i have aem wideband sensor and all gauges, im running on stock map sensor for now cause i dont need to change it yet but i do have the 2 bar map sensor

your good at 10psi with stock map. if youd like i can make you a basemap and street tune it for you.

once again ill ask , IS YOUR WIDEBAND WIRED INTO S300? lol. hard to help these days.

yeah that will be great thanks, also yeah its wired up to the s300. if need anymore info let me know, again thanks

ok how are you controlling your boost?

heres a basemap. get the car running and warmed up , keep eye on the A/F at all times. if its too lean , 16:1 part throttle , in your case 12.5:1 for WOT , stop , send me what you have for datalog and let me adjust it. datalog from the moment you start it till you stop ok. boost cut is set at 10psi , and i have enabled lean protection for when your in boost at 13.5:1.

any questions?

god i hope he just didnt load that on there and hes out there beating on it , lol. some people seem to have problems following instructions , lol.

Nah i haven't yet waiting for my friend to come back, so on monday we can compare it to the one i already have on the ecu. i'll keep you updated

why did you want a map if you already have one on there? you wont be able to find a map to load on there and have it run perfect , its not gonna happen. needs to be tuned no matter what. the map you posted up has hot boost cut set to 24 psi , lol. just so you know.

how is your boost controlled? manual or electronic?

why do you need your friend? get the car running on the map i gave you , and datalog it. post it up.

He could run my map and make injector adjustments and retard the timing for the base. BUT he needs a GM 3 bar


I say screw the stock map, go get a 3 bar and make the adjustments as I stated above and head to a tuner. Or just get what I got in my sig and be rocking a baller map from a Well named Tuner


Dave Blundell

i DLed ur basemap and it worked great for my setup, runs a little rich but thats ok, but as soon as i hit 5 PSI it goes into limp mode or something and fuel ignition stuts of. if i sent u what i datalogged could u help me out?

RW

What year of motor,ecu, chassis.

And did you check the knock limits

I'm no tune-R, I can do some adjustments but not going to council others as I'm not a pro at it

96 civic EX, P28 ECU, 94 H22A1, build bottom end, stock head, T04E turbo, 8 PSI. no Knock on p28, running blue top INJ.