Hondata

Hey guys this is my first post in the Forums. I need a little help. I no my car is running really rich.

If anyone can help me attach this Datalog. I went to browse, c drive Kman and i cant locate the Datalog(it doesnt show up when i try to attach it, but im able to load it in Kman)

Current set up

K20A3(RSX 5Spd)
Injen CAI
02/04 Type S Header and cat
Greddy Evo 2 Catback
PRB Intake Manifold
P2R PRB Power Plenum
P2R Throttle Body Spacer
IMG
Kpro of Course

When i start the car with that cal the idle is very bumpy and runs extremly rich. I drived it off the driveway and cruised in the neighborhood. The car does ok in part throttle, but once opened up to WOT and back down the car just does its own thing and wont respond and stays in gear till stall out.

After the stall out the engine only remains on and reponsive for about 5 seconds. In order to drive back home i had to reload the cal and take it easy.

As soon as i can figure out how to post a Datalog i will.
Running off of the Base Tuned 91 Octane(Which i am using 93)

the datalog should save in the Kmanager folder. when you post a message on this site , underneath where you are typing if you scroll down is a place to attach your datalog. click browse , point itto your datalog , hit ok. click add atachment , once its done , click submit , lol.

Im very computer Literate. But when i do as u say the Datalogs are not visible...

Follow this link for the Datalog

http://forums.clubrsx.com/showpost.php? ... ostcount=5

that datalog doesnt work. its not even a .kdl file. when you have kmanager open and have your datalog done. you need to click on the datalog tab at the top , and save as. save it to your desktop. need to know what calibration your using as well boss. the datalog is useless with the fuel map.

I found the problem, but have not fixed it yet. Since im using a Base RSX TB i guess i have to drill a channel for the map sensor. Im still looking into it, any links or advice would be helpful