Page 1 of 1
MSD with Hondata
Posted: Fri Aug 29, 2003 11:33 pm
by quik1
I have the Hondata s200 system and also have an MSD 6a ignition hooked up in my car, I have been told that you can't run both together is this true. It seems to run fine the person told me that they counter act each other.
Posted: Mon Sep 01, 2003 8:16 am
by DaX
It's like having two things that perform the same operation. Both allow you to adjust the timing.
Posted: Mon Sep 01, 2003 12:11 pm
by quik1
I can't adjust timming on my MSD its just the amplifier box, can Hondata run right with MSD?
Posted: Thu Nov 13, 2003 3:34 am
by civicsir+
yes it can. i just hooked up my MSD 6A box last nite. All my MSD is used for is provide a better spark using a capacitor, and i have used an external coil. Hondata cannot see the difference as all it does is provide signal for when to ignite.
Posted: Thu Nov 13, 2003 6:07 am
by Dariusz
It can work both at the same time, but I put off my MSD from my car because it destroy the OEM ignition modules. I try 5 different MSDs and lose 7 OEM ignition modules ($200 each).
MSD don't work the money for performance!
Posted: Thu Nov 13, 2003 10:32 am
by civicsir+
what do you mean the ignition module? where is this and why was it dying? hmmm should i remove my MSD then?
Posted: Thu Nov 13, 2003 2:51 pm
by Dariusz
The ignition module is the one that is inside the Distributor (in a Integra GSR is the part number 30130-P72-006). It start the signal from the crank to fire the sparkplug. This piece cost $198!!