Hondata

Posted: **Sun Oct 05, 2008 10:48 pm**

I have a PLX M300, 5V output is running through D10 (ELD). I had this working before on a much older version of Hondata Smanager (I want to say 1.2) with no issues.

Updated Hondata and now the ECU will no longer correctly log AFRs. I have the wideband source in the Closed loop tab (in Parameters) set to D10(ELD) but the ECU is still trying to log AFRs through O2. Any fix for this? I am running version 1.3.8.0

Thank you.

Posted: **Mon Oct 06, 2008 8:49 am**

You can post your calibration & datalog, or email them to support@hondata.com ?

Posted: **Mon Oct 06, 2008 11:50 am**

Have you uploaded the calibration using the new version of software?

Posted: **Mon Oct 06, 2008 5:40 pm**

Spunkster wrote:Have you uploaded the calibration using the new version of software?

That fixed the problem. I had realtime update on and made some minor adjustments, I figured the ECU would update but it never did. I had to manually upload the calibration. Thanks!

Hondata

Having problems with logging AFRs

Having problems with logging AFRs