Page 1 of 1
vtec
Posted: Mon Sep 22, 2008 3:05 am
by hyro
hi
i am having a problem with vtec entering too early. i have setup a lower boundary of 5200rpm and 80kpa pressure.
when i reach 5200rpm, whatever the pressure is, i am entering vtec tables.
Posted: Mon Sep 22, 2008 10:05 am
by Spunkster
Posted: Mon Sep 22, 2008 1:49 pm
by hyro
sorry,
don't know the serial number of the ecu, it's a friends ecu.
here is a datalog and the kal. the kal is not finished, so, fuel maps look weird.
Posted: Mon Sep 22, 2008 3:20 pm
by Spunkster
THis is because you are using Alpha-N. The TPS signal is being translated into a map value. If you look at the datalog even while the car is not running but on positiona and datalogging you will see this.
Posted: Mon Sep 22, 2008 11:55 pm
by hyro
Spunkster wrote:THis is because you are using Alpha-N. The TPS signal is being translated into a map value. If you look at the datalog even while the car is not running but on positiona and datalogging you will see this.
yes, is using alpha-n. the car is running with itbs. but using alpha-n, ecu doesn't look for pressure to activate vtec?
Posted: Tue Sep 23, 2008 10:54 am
by Spunkster
Spunkster wrote:The TPS signal is being translated into a map value.
Posted: Tue Sep 23, 2008 1:28 pm
by hyro
Spunkster wrote:Spunkster wrote:The TPS signal is being translated into a map value.
ok, but i don't understand how this affect to vtec entering at a certain rpm without looking for pressure to activate?
i am runing alpha-n on my own car and it is working ok.
Re: vtec
Posted: Wed Sep 24, 2008 10:33 am
by rikitaun
hyro wrote:hi
i am having a problem with vtec entering too early. i have setup a lower boundary of 5200rpm and 80kpa pressure.
when i reach 5200rpm, whatever the pressure is, i am entering vtec tables.
menudo tunero de palo tu y el Uri :D
Re: vtec
Posted: Wed Sep 24, 2008 12:55 pm
by hyro
rikitaun wrote:hyro wrote:hi
i am having a problem with vtec entering too early. i have setup a lower boundary of 5200rpm and 80kpa pressure.
when i reach 5200rpm, whatever the pressure is, i am entering vtec tables.
menudo tunero de palo tu y el Uri :D
dile al dueño del coche que me lo trae defectuoso.
Re: vtec
Posted: Thu Sep 25, 2008 5:13 am
by rikitaun
hyro wrote:rikitaun wrote:hyro wrote:hi
i am having a problem with vtec entering too early. i have setup a lower boundary of 5200rpm and 80kpa pressure.
when i reach 5200rpm, whatever the pressure is, i am entering vtec tables.
menudo tunero de palo tu y el Uri :D
dile al dueño del coche que me lo trae defectuoso.
jajajaja, como coño has puesto el TPS en la columna ????
no lo veo como opcion por ningun sitio...eres un puto friki