Page 1 of 1
Using switch to engage datalogging
Posted: Wed Sep 17, 2008 7:55 pm
by SPOOLIN
how do you setup the use of the AC pin for enabling datalogging. I want to use a switch to start it, but not the AC switch. Do i just set the switch up to ground that pin?
Posted: Wed Sep 17, 2008 8:03 pm
by Too_smooth
One lead of the switch to the ecu and the other to ground.
Posted: Thu Sep 18, 2008 8:49 pm
by SPOOLIN
so you are answering my question as simply being, i just have to ground that pin to make it start data logging using a switch.
Posted: Mon Sep 22, 2008 1:26 pm
by Too_smooth
Yes, that's all I have done for my three switches.