Hondata

The Tab estimated change in fuel tab towards the header of smanager - Does the values it displays show percentage the percentage needed to be removed or added or the amount of value needed to decrease or increase +/- from the high fuel table ?

it's the percentage change from the autotune base table to get to the target lambda table

+ = need more fuel
- = need less fuel

this article explains it some more
http://www.hondata.net/techwidebandtuning.html

although it seems that this image has it backwards
http://www.hondata.net/images/techlambd ... hanges.gif
.. maybe they should fix it

nscirocco wrote:it's the percentage change from the autotune base table to get to the target lambda table

+ = need more fuel
- = need less fuel

this article explains it some more
http://www.hondata.net/techwidebandtuning.html

although it seems that this image has it backwards
http://www.hondata.net/images/techlambd ... hanges.gif
.. maybe they should fix it

Thanks for the response but the images in the link show an actual % symbol, while in Smanager it just shows a numeric #.

Spunkster: Can you answer whether it is a % adjustment or just a -/+ value off the table ?

percentage


WEST

Remember to set-up the injector voltage compensation or this feature wont be accurate.