Hondata

Posted: **Thu Jun 26, 2008 3:07 pm**

- 37820-pnf-a03
2091-303823

2002 civic si
JRSC w/ 3.8"
intake
buddy club race header
full exhaust
650cc injectors
k-pro

MAP will not read boost, and A/F is stuck at 10.70 on datalog graph... but while datalogging, on the display screen shows the A/F reading.

Posted: **Thu Jun 26, 2008 3:45 pm**

Are you using the MAP relocator provided by Jackson Racing?

Posted: **Thu Jun 26, 2008 3:54 pm**

i am using one i got from inlinefour.

Posted: **Thu Jun 26, 2008 5:11 pm**

If you are not seeing boost, it sounds like you don't have the map relocator installed correctly.

http://www.hondata.com/techrace_jrsc-install.html

Posted: **Thu Jun 26, 2008 6:07 pm**

"You will then need to connect the vacuum line from the MAP relocator to where the Jackson Racing TFI vacuum line was attached on the manifold"

do you have a better pic of how this should be?

Posted: **Fri Jun 27, 2008 9:54 am**

We only have the pictures on the website. If you are unsure of where it should connect, you should contact Jackson Racing.

Hondata

K-pro problems

K-pro problems