Hondata

someone know why after the s2000 k-pro installation the CEL code P0132 02 sensor voltage high light up?

Select 'Use Secondary Oxygen Sensor for Primary'. is done

http://www.hondata.net/forum/viewtopic.php?t=3629

not enough informaiton to give an educated guess

- serial number of your K-Pro : 03003322
- the calibration (as an attachment)
- a datalog of a problem (as an attachment)
- what sort of vehicle you have: S2000 2.2 2004
- what sort of ECU you are using: PRB with S2000 K-pro
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).: no modification that could affect the ecu
- a specific description of the problem : the code P013202 sensor High voltage light up[/b]

That datalog does not show any error codes.

I know it light up before and after the dyno tuning

OK finally the customers datalog it

He datalog it at idle, and the 02 sensor high voltage codes is present

What could cause it Spkunster?

What exactly has been done to this car?

the car is completly stock

And I installed the k-pro and tune it

nothing more than that

I am having the same issue except I am boosted with the bolt on Greddy turbo kit...any thoughts as to why this is happening?

I will receive my S2k K-pro next week

I will see if the same thing happen on mine in the next weeks

Garrett_si wrote:I will receive my S2k K-pro next week

I will see if the same thing happen on mine in the next weeks

I thought I had a faulty o2 sensor so I bought a new one and it is throwing the same code as yours.

After a few trips back to my tuner I continue to throw the same code related to the o2 sensor. There is another local Greddy boosted w/K-Pro and the only difference between his set up and mine is the IAT sensor. When he bought his K-Pro it was not required to swap it out, when I bought mine about 1.5 mths ago, Hondata's K-Pro S2000 link on this site added it to their list of additional parts and called for a new one. I am swapping it back on Monday and will see if I have the same problem.

Anyone from Hondata know what may be causing this?

We are looking into a permanent fix for this and will update you when we have a resolution.

Spunkster wrote:We are looking into a permanent fix for this and will update you when we have a resolution.

Interesting? So this has been a common issue? Will you be notifying us via this thread or an e-mail? When do you think you will have this fix ready?

Do you know why it only seems to be happening with the newer users like myself?

Thanks for responding.