Page 1 of 1
timing issue......
Posted: Mon May 26, 2008 1:58 am
by 8112
what timing would be recomended for a d16y8 on 20 psi? i have it at .75 retard per pound of boost and it back fires after 10 psi.
Posted: Mon May 26, 2008 6:17 pm
by HONDA GHANDI
Have you datalogged this issue? Posting the calibration file and datalog will go along way to helping us help you
Posted: Tue May 27, 2008 10:37 am
by Spunkster
This is really only somethign you can safely check and tune on the dyno. Also what works well for one person may not work so well for you and your setup.