Page 1 of 1
what wide band should i use AEM or PLX??
Posted: Mon May 19, 2008 10:56 pm
by 671k20a
WHATS UP! i NEED SOME HELP... I have a 2000 SI W/ a k20aR. I'm not getting any reading of air fuel ratio thats on the kpro. So i plan to buy a wide band, but not sure what to get. Thanks alot in advance.
Posted: Tue May 20, 2008 9:45 am
by Spunkster
What is the code on the side of your ecu?
Posted: Tue May 20, 2008 10:59 am
by 671k20a
prd
Thanks...
Posted: Wed May 21, 2008 9:27 pm
by 671k20a
guess nobody wants to help.. thanks anyways...
Posted: Thu May 22, 2008 9:23 am
by Spunkster
I would recommend the PLX. This will allow you to use the narrowband output from the PLX for running the car in closed loop and the wideband to datalog.
Posted: Sat May 24, 2008 5:06 pm
by 671k20a
Spunkster wrote:I would recommend the PLX. This will allow you to use the narrowband output from the PLX for running the car in closed loop and the wideband to datalog.
which plx 100 or 200? And thanks alot for your help.