Page 1 of 1
injector kill on decel, normal?
Posted: Sun May 18, 2008 7:19 pm
by b16spaz
hi i just got my s300 up and runing today and went out for a little test and tune drive. everything works great, love the program and all but noticed that everytime the car is in decel or engine pulling heavy vacume it will kill the injectors. i dont know if this is normal or not because i used to have a power fc and it never did it on that just curious.
setup:
b16 greddy turbo kit
RC 650's
omni 4bar
thanks
Re: injector kill on decel, normal?
Posted: Sun May 18, 2008 10:44 pm
by DipDip
Yes, this is normal
Posted: Sun May 18, 2008 11:39 pm
by b16spaz
cool, thanks just making sure. didn't think it was bad but always nice to have a second voice tell you. just got back from tuning it and good god i love the smanager, it is 100x easier to use than the power fc datalogedit.
Posted: Mon May 19, 2008 12:58 am
by b.serious
hey sorry to thread jack.. but ive got the same RC 650's saturated. can i ve ure calibration file if thats ok with u..
Posted: Mon May 19, 2008 10:24 pm
by b16spaz
sure i have been street tuning it its not 100% done yet but runs pretty good. the only thing im having trouble with is getting the boost control to rais the boost it wont go over 11psi i know its not the wastegate because i got it to hold steady @ 15psi with the AVCR i used to use so any help would be apreaciated.
my full setup is
1.7l
9. to 1 compression
greddy kit with IC
full 3" elbow back
650's
skunk 2 im
itr head
s300boost sol on ELD
PLX wideband