Page 1 of 1
Lambda overlay with WB on ELD pin?
Posted: Sat May 03, 2008 2:53 am
by LK7R
As i understand it is not possible to use lambda overlay on PRA ECU even if WB input is wired to ELD pin on ECU?
Will this be addressed somehow in the future please? Or do I have something missconfigured?
cheers
Dan
Posted: Mon May 12, 2008 12:02 am
by LK7R
Or is there anyone using PRA ECU with WB on ELD pin who can help me out with AF tuning?
Posted: Mon May 12, 2008 10:55 am
by Spunkster
You just have to do datalogs and the look at ehm and look at the AF value that is recorded from the ELD input you have selected.
Posted: Mon May 12, 2008 12:03 pm
by LK7R
It would be much nicer if I could use lambda overlay ... I take it as "NO"
Posted: Fri May 16, 2008 8:30 am
by Mr Aryan
i see that you got the LC-1 wideband, did you wire it up with the ELD and worked well?
i have the LM-1 and had some probelm reading AFR through the K-Manager. I had to use the AEM EUGO.
Posted: Fri May 16, 2008 9:51 am
by LK7R
Yes it is working fine, i had to put -0.2V voltage offset to get correct readings, but otherwise works without any probs.
Got it real cheap - 110 GBP incl delivery to my door.
Re: Lambda overlay with WB on ELD pin?
Posted: Sun Jan 10, 2010 7:18 am
by Honda9ower
LK7R wrote:As i understand it is not possible to use lambda overlay on PRA ECU even if WB input is wired to ELD pin on ECU?
Will this be addressed somehow in the future please? Or do I have something missconfigured?
cheers
Dan
Is this now possible?, in the kmanager change history it states:
"V1.2.4 (17 July 2008) Fixed external wideband input not showing correctly on lambda overlay."
I'm looking at buying a wideband and it would be extremely useful to be able to use the output from it for the lambda overlay.
Posted: Sun Jan 10, 2010 1:19 pm
by LK7R
Yes it works just fine!
Posted: Sun Jan 10, 2010 1:22 pm
by Honda9ower
Excellent!, I'll order up a wideband and controller....
