Page 1 of 2
SManager V1.3.4
Posted: Tue Mar 04, 2008 1:24 pm
by Hondata
SManager V.1.3.4 is available for download. The main change is boost by gear and rpm - this also effectively can function as boost by speed, since rpm, speed and gear are interrelated.
SManagerV1-3-4.exe
Changes:
? Firmware version 1.04
? Added boost control by rpm and gear.
? Added 'Adjust' to parameter tables.
? Added proportional table tracing.
Posted: Fri Mar 07, 2008 2:06 pm
by 2 0 3
Cant wait to try out the new boost control!!
Posted: Fri Mar 07, 2008 8:04 pm
by turbotypeR
thank you! you guys rock!
Posted: Fri Mar 07, 2008 10:22 pm
by 91accordexr33
I love the boost by gear, been using it for about 2 months now. Held solid on the dyno...
1st 6psi, 2nd 12psi, and 3rd 18psi
Using the AEM Boost sensor, works great.
Posted: Sat Mar 08, 2008 10:09 am
by planetspeed
Just curious how does the ecu know what gear the car is in?thanks..
Posted: Sun Mar 09, 2008 12:04 am
by Tchleung
RPM, Speed, and the Gear Ratio Values.
Posted: Fri Mar 21, 2008 7:19 pm
by keow
i try to use gear select ratio. bot it's not working. thanks
Posted: Mon Mar 24, 2008 9:59 am
by Spunkster
keow wrote:i try to use gear select ratio. bot it's not working. thanks
Noted to be fixed
Posted: Mon Mar 24, 2008 7:11 pm
by krweby
Information shows that I have firmware ver 1.03 but will not let me upgrade to 1.04.
Posted: Tue Mar 25, 2008 9:22 am
by Spunkster
Close Smanager, reopen it, go to File, New and select one of the calibrations from the list and pload it (the one you choose does not matter). When you do this it should update the firmware. When done, upload your calibration.
Posted: Tue Mar 25, 2008 9:25 am
by krweby
Spunkster wrote:Close Smanager, reopen it, go to File, New and select one of the calibrations from the list and pload it (the one you choose does not matter). When you do this it should update the firmware. When done, upload your calibration.
Thanks. I'll give this a try when I get home tonight. I'll let you know.
Posted: Tue Mar 25, 2008 5:24 pm
by krweby
That didn't work. The update for the firmware is grayed out also.
Posted: Wed Mar 26, 2008 6:22 pm
by krweby
Ok so I got it to work. But I had to use my work laptop to do it. My laptop is running Vista (Everything was working except for being able to update the firmware.) so it might have something to do with it. My work laptop is running XP-pro. Just thought I would let you know.
I really hate Vista I'm thinking of going back to XP-pro or running VMWare so I can run my old programs that don't work under Vista.
Posted: Tue Apr 01, 2008 7:01 pm
by Shmaa
Whats the status on the expanded lambda conversion table?
Posted: Wed Apr 02, 2008 9:18 am
by Spunkster
Shmaa wrote:Whats the status on the expanded lambda conversion table?
Have you tried the new version?