Help, no longer have my tune!

SovXietday · Post by **SovXietday** » Mon Mar 03, 2008 9:03 pm

Was out tuning the other day, after I got done I closed my laptop and that was the end of that. Had to reformat the computer lost all my data blah blah blah.

Is there any way to pull my tune off of the ECU so that I don't have to start over again? Any help would be super appreciated!

AllMotorMatt · Post by **AllMotorMatt** » Tue Mar 04, 2008 10:14 am

You should be able to download the tune from the ECU and save it. Read the manual it'll help out.

planetspeed · Post by **planetspeed** » Wed Mar 05, 2008 6:23 am

AllmotorMatt:

Just a querry on your engine setup.you still running the LS/VTEC?if yes, what HP have you pushed it on the Dyno?pump gas?Thanks!

AllMotorMatt · Post by **AllMotorMatt** » Wed Mar 05, 2008 6:27 am

Not to Jack the thread but
Planetspeed, to answer your question, using a 1.8 bore LS Block it made 210/146 with a conservative pump gas tune.

planetspeed · Post by **planetspeed** » Wed Mar 05, 2008 6:44 am

Thanks for the reply AllMotorMatt..I'm a little overboard from the thread but I just thought of asking you after I saw your engine setup below your reply..anyway, I have a similar setup as yours but I'm afraid to push my ignition timing at high rpm..what's your ign timing at 99kpa, say 7k-9k rpm?I'm on pump gas too.Thank you.

AllMotorMatt · Post by **AllMotorMatt** » Wed Mar 05, 2008 8:48 am

I'm not sure off the top of my head. I am currently having an issue with connecting to Hondata so I can't even look : (

planetspeed · Post by **planetspeed** » Sat Mar 08, 2008 9:48 am

Thanks for the reply MATT.Hope you could PM me for some details of the tune sometime.I just want to run my car safely and quick.thanks again.