Hondata, Kmanager 1.2.3.1 possible fault.
Posted: Sat Mar 01, 2008 1:12 pm
It's this a bug ?
Open a .Kal , Go to Fuel Tables, mark 2 files and CTRL-D or CTRL-I or CTRL-J to modify the fuel..... all ok...
save the .KAL and load at ECU
the car don't run well..... :shock: :shock: :shock:
Then I open the .KAL with notepad and saw this:
AFTER ADJUST FUEL:
NumCamTables=6
HighSpeed=0
Rpm=500,750,1000,1250,1500,1750,2000,2250,2500,2750,3000,3500,4000,4500,5000,5500,5800,6000,7000,8100
Load=0.127,0.214,0.3,0.414,0.528,0.643,0.757,0.873,0.988,1.045,1.288,1.558,1.833,2.105,2.51,2.918
Cam0Row0=79,226,372,568,760,958,1132,1326,1525,1625,2100,2631,3162,3693,4490,5287
Cam0Row1=80,235,386,589,784,968,1155,1364,1572,1672,2160,2707,3253,3800,4620,5440
Before:
NumCamTables=6
HighSpeed=0
Rpm=500,750,1000,1250,1500,1750,2000,2250,2500,2750,3000,3500,4000,4500,5000,5500,5800,6000,7000,8100
Load=0.127,0.214,0.3,0.414,0.528,0.643,0.757,0.873,0.988,1.045,1.288,1.558,1.833,2.105,2.51,2.918
Cam0Row0=75.1282139421,214.9237512774,353.7682985628,540.1623483432,722.752437924,911.0484678042........
Cam0Row1=76.079203992,223.4826617265,367.0821592614,560.1331393911,745.5761991216.....
I have Settings- > Fuel Table 1%
it's correct decimal values ??? .... this fault was happend only with this version of Kmanager... If I load and old .kal the cars Runs OK.
Open a .Kal , Go to Fuel Tables, mark 2 files and CTRL-D or CTRL-I or CTRL-J to modify the fuel..... all ok...
save the .KAL and load at ECU
the car don't run well..... :shock: :shock: :shock:
Then I open the .KAL with notepad and saw this:
AFTER ADJUST FUEL:
NumCamTables=6
HighSpeed=0
Rpm=500,750,1000,1250,1500,1750,2000,2250,2500,2750,3000,3500,4000,4500,5000,5500,5800,6000,7000,8100
Load=0.127,0.214,0.3,0.414,0.528,0.643,0.757,0.873,0.988,1.045,1.288,1.558,1.833,2.105,2.51,2.918
Cam0Row0=79,226,372,568,760,958,1132,1326,1525,1625,2100,2631,3162,3693,4490,5287
Cam0Row1=80,235,386,589,784,968,1155,1364,1572,1672,2160,2707,3253,3800,4620,5440
Before:
NumCamTables=6
HighSpeed=0
Rpm=500,750,1000,1250,1500,1750,2000,2250,2500,2750,3000,3500,4000,4500,5000,5500,5800,6000,7000,8100
Load=0.127,0.214,0.3,0.414,0.528,0.643,0.757,0.873,0.988,1.045,1.288,1.558,1.833,2.105,2.51,2.918
Cam0Row0=75.1282139421,214.9237512774,353.7682985628,540.1623483432,722.752437924,911.0484678042........
Cam0Row1=76.079203992,223.4826617265,367.0821592614,560.1331393911,745.5761991216.....
I have Settings- > Fuel Table 1%
it's correct decimal values ??? .... this fault was happend only with this version of Kmanager... If I load and old .kal the cars Runs OK.