Page 1 of 1
98' GSR with Moss Motors/Hondata cruise control not working
Posted: Fri Jun 27, 2003 4:56 pm
by Zeus
Was the cruise control on my 98' GSR controlled by the OBDIIA ECU, or is it's controler in a seperate module? Since the install of the Hondata S200 P28, the cruise has not worked... I'm wondering if it is a related problem or not... The car has over 105k at this point...
Re: 98' GSR with Moss Motors/Hondata cruise control not work
Posted: Sun Jun 29, 2003 11:03 am
by turbosi92
Zeus wrote:Was the cruise control on my 98' GSR controlled by the OBDIIA ECU, or is it's controler in a seperate module? Since the install of the Hondata S200 P28, the cruise has not worked... I'm wondering if it is a related problem or not... The car has over 105k at this point...
Do you have launch control? If so, this is your problem. When you installed the clutch switch for the HOndata, you most likely took out the old clutch switch. This is why your cruise isn't working. This stock clutch switch is what shuts off the cruise when you depress the clutch switch.
To fix this you just need to jump the two wires together that connect to this factory clutch switch.
HTH.
Posted: Sun Jun 29, 2003 5:37 pm
by Zeus
no launch control...