JRSC at 11psi w/aftercooler Timing question...
Posted: Sat Dec 29, 2007 10:26 am
Hello Hondata. It's Sonny again. The aftercooler is working great. I am seeing 10.5psi after the cooling core in the manifold and boost temps measured after the core never exceed 150F. Before the IAT was well over 200F. I have a question about timing. What would you run for timing in the high cam table at 50 degrees. I am at 22 in the 8psi column and 21 in the 12psi column. Is that too much. It doesn't knock, I had it up to 23/22 and it still didn't knock. What degree is too much and not making power?