Page 1 of 1
addition to boost control request
Posted: Sat Dec 22, 2007 1:32 pm
by turbotypeR
I just wanted to request an addition to the boost control. I use the gear dependant boost control and love it. However, it would be very nice if I could control rpm as well as boost per gear. In other words, you could make the boost come on at whatever rpm you wanted, in what gear you wanted instead of having the same boost all the way through each gear. I think this would help alot with traction because you could control how hard the boost comes on in each gear. Thanks!
BTW- I love the new display options. You can set it up where it is much easier to get info from the datalog
Posted: Sat Dec 29, 2007 3:28 pm
by Indub
I too would love to see more boost control options.
Preferably, the ability to control ramp time, etc
Posted: Thu Jan 03, 2008 7:39 am
by turbotypeR
is this possible?
Posted: Fri Jan 04, 2008 10:47 am
by 2 0 3
FWIW...
Im in for this too!
(worked in the shift cut thread =P)
Posted: Tue Jan 08, 2008 12:03 pm
by turbotypeR
what do you think?
Posted: Tue Jan 08, 2008 5:27 pm
by Indub
Is this already something in the works?
Posted: Thu Jan 17, 2008 7:15 pm
by b20luda
My boost drops off in the high RPM, being able to adjust per RPM would be great...
Posted: Thu Jan 17, 2008 8:32 pm
by Silverbeast
b20luda wrote:My boost drops off in the high RPM, being able to adjust per RPM would be great...
How much of a boost drop off? What kind of turbo/manifold/DP are you using?
Posted: Fri Jan 18, 2008 2:54 pm
by Hondata
Rpm based boost by gear is being developed.
Posted: Fri Jan 18, 2008 3:00 pm
by turbotypeR
thank you! you guy are the best!
Posted: Wed Jan 23, 2008 4:55 pm
by b20luda
Silverbeast wrote:b20luda wrote:My boost drops off in the high RPM, being able to adjust per RPM would be great...
How much of a boost drop off? What kind of turbo/manifold/DP are you using?
SLS top mount 44mm tial GT3076R (.82) 3in DP.....
I have since switched to the mac boost solenoid and its MUCH MUCH better, pretty much rock solid... the GM solenoid is garbage, its my 2nd one, both were brand new bought from the dealer...
Posted: Wed Jan 23, 2008 6:16 pm
by Silverbeast
b20luda wrote:Silverbeast wrote:b20luda wrote:My boost drops off in the high RPM, being able to adjust per RPM would be great...
How much of a boost drop off? What kind of turbo/manifold/DP are you using?
SLS top mount 44mm tial GT3076R (.82) 3in DP.....
I have since switched to the mac boost solenoid and its MUCH MUCH better, pretty much rock solid... the GM solenoid is garbage, its my 2nd one, both were brand new bought from the dealer...
I have to agree the apexi, aem, mac solenoids are really quite efficient and work well. I have ran about 40psi with them and no issues with creep or taper.
Posted: Thu Jan 24, 2008 5:49 am
by 2 0 3
Hondata wrote:Rpm based boost by gear is being developed.
Thank you :D
Posted: Fri Feb 15, 2008 11:10 am
by b20luda
any idea when boost by RPM will be released...rough estimates?? Anything?
Posted: Fri Feb 15, 2008 11:31 am
by Hondata
Currently in beta testing.