Hondata

Posted: **Fri Dec 21, 2007 8:11 pm**

Just trying to connect the AEM gauge with the ELD...
i've put the volt vs AFR in the table..

from 14-15afr the gauge and the log show the same... less than 14 it starts to go off like .2...

anyway... my qustion is does the ELD reads less than 1 volt? cause when the gauge reads somewhere in 11s afr, the log stops at 12afr which equels to almost 1 volt.

as per the AEM gauge manual:
1.09 volt = 12.18afr

thanks

Posted: **Mon Dec 24, 2007 9:43 am**

Yes, the ELD can read below 1V

Posted: **Sat Dec 29, 2007 6:13 pm**

for some reason, the datalog doesn't read below 12:1 af. Is it possible for the ELD on the Civic Type-R's to have different ELD voltage?

Posted: **Sun Dec 30, 2007 12:55 am**

hardcorersxs wrote:for some reason, the datalog doesn't read below 12:1 af. Is it possible for the ELD on the Civic Type-R's to have different ELD voltage?

the ELD option was made for the euro civic type R only, because they don't run factory wideband o2