Page 1 of 1
1000cc inj cold idle problems
Posted: Fri Dec 14, 2007 3:17 pm
by eggyoak
well i have a k20a2 turbo running k-pro... im having problems figuring out how to adjust the cold idle fuel enrichment... with my 1000cc injectors i get tons of fuel smoke on cold idle but once it warms up it ildes normal... any help would be greatly appreciated...
thanx randy
Posted: Fri Dec 14, 2007 4:37 pm
by Spunkster
Make changes to the Temp compensation table for the idle and low load areas.
Posted: Fri Dec 14, 2007 8:38 pm
by eggyoak
well i must be blind because all i see it IAT temp comp.... i was looking for the temp comp tables for water temp but i couldnt figure it out... where are they located???
Posted: Mon Dec 17, 2007 10:40 pm
by eggyoak
any help on this... other than the IAT comp..
Posted: Tue Dec 18, 2007 12:58 am
by hardcorersxs
tune idle and part throttle and have a different map for colder temperatures
Posted: Tue Dec 18, 2007 1:30 pm
by eggyoak
that is just a total pain in the ass even free software like Crome alows for ect comp....
Posted: Wed Dec 19, 2007 3:44 pm
by hardcorersxs
eggyoak wrote:that is just a total pain in the ass even free software like Crome alows for ect comp....
K-pro allows for temp compensation (via IAT sensor) as well. Unfortunately, at this time, it does not have ECT Temperature. Maybe a rep from hondata (doug, derek, or javier) can chime in.