Hondata

Posted: **Sat Nov 10, 2007 11:34 am**

Anyone know if this will work with kpro? Does it utilize the correct range and such:

http://www.rs-autosport.net/catalog/pro ... cts_id=216

GM Air Temp Sensor

Currently my air temp sensor is before the turbo which is OK but not the best location for it. I wanna use this temp sensor so I don't have to make threads on my current plastic IAT sensor. This looks a lot better and it's only $20... Maybe I'll just order it and see how it goes lol... I wanna tap it into my intake manifold right before my methanol injection nozzle.

Matt

Posted: **Mon Nov 12, 2007 10:42 am**

You will be much better off just getting the IAT sensor from an Integra. It has 2 holes to secure it with screws and seals with an o-ring.

Posted: **Mon Nov 12, 2007 9:44 pm**

ic and this will work with kpro eh?

Posted: **Tue Nov 13, 2007 11:38 am**

yes, the plugs may be different so you may need that from a junk yard as well.

Posted: **Thu Nov 15, 2007 10:14 pm**

Just so you know, I made an aluminum adapter that you can weld to aluminum charge piping, and it allows you to use the stock K-Series IAT sensor.. Full-Race uses these on all of their K-series kits now.. If you need one, drop me a line..

Posted: **Mon Nov 19, 2007 5:56 pm**

locash wrote:Just so you know, I made an aluminum adapter that you can weld to aluminum charge piping, and it allows you to use the stock K-Series IAT sensor.. Full-Race uses these on all of their K-series kits now.. If you need one, drop me a line..

mk how much? PM me all up on crsx: secretpickle

Posted: **Tue Nov 20, 2007 11:17 am**

secretpickle wrote:
locash wrote:Just so you know, I made an aluminum adapter that you can weld to aluminum charge piping, and it allows you to use the stock K-Series IAT sensor.. Full-Race uses these on all of their K-series kits now.. If you need one, drop me a line..
mk how much? PM me all up on crsx: secretpickle

I don't visit crsx, drop me a line at joe@locashracing.com