Page 1 of 1
S300 freezing up with MSD Ignition
Posted: Fri Oct 12, 2007 6:17 am
by thudreem
http://www.honda-tech.com/zerothread?id=2122381
Were are having this problem, can you guys help us out?
Posted: Fri Oct 12, 2007 9:48 am
by Spunkster
The problem is not the s300. OEMs make their ignition systmes to much higher quality standards and must keep electrical noise/interference to a minimum. The problem is that aftermarket ignition systems are not made to these high standards and generate a lot of interference.
Posted: Fri Oct 12, 2007 9:58 am
by thudreem
Is there something I can put inline from the alternator or some wire that leads from the ignition to the ECU that will reduce the interference?
Posted: Fri Oct 12, 2007 2:52 pm
by SFWD 1934
Sean,
I posted on the link you left on HT.
Jason
Posted: Fri Oct 12, 2007 5:22 pm
by Spunkster
Not really, the interference is picked up through the other wires and the chassis.