Hondata

ok i have an apexi seleniod. ive been having problems setting the boost up correctly using the s300. now i just want to check that i have it hooked up right. i have 3 ports on my sel. one where it comes in and 2 out. one of the outs is so u can use the sel as normally open and one for normally closed. if i'm using the one thats set up for normally closed and i suppose to plug the port i'm not using or leave it open???

A boost control solenoid cannot be changed from normally open or normally closed. It is either one or the other. You will have to look at the technical information on the model you have to see how it should be plumbed. There are about 6 different styles of Mac valves.

sorry i dont know if i didn't post it or u didn't read it. its an Apexi seleniod valve and yes it can be routed to be both

Please provide documentaion of this.