Hondata

Would the K-Pro be applicable for a K20Z2 engine I have on my civic. I intend to drop in a supercharger and will need a programmable ECU. Will either use a Jackson or a Vortech.

Any info or insight on this matter would be helpful!

The engine doesn't matter - they are all the same ECU-wise. What matters is the type of transmission signal and the vehicle wiring harness type.

What vehicle will this be in?

That is comforting to know. Though I am new to the K20 and the fly by wire system. How do I go about the data that tells me about the transmission signal and the vehicle wiring harness type.

More info please!

Thanks for replying on my post!

The engine is on a 2006 Civic FD20 sedan with jdm specs straight from the factory. Would have been nice if they had chosen the Z3 or the A series, but I have to work with what I have got.

It's a fairly new car. Doesn't even have more than 1000 kilometers on it, so I am planning ahead to add a bit more power, as I mentioned a supercharger.

I also have a 2000 Civic with a factory B16. We bolted on a Turbonetics T3/T4 on it and pushing 236Whp, but it causes so much strain on the engine, so now I am just opting for the supercharger. I have an option of either the two manufacturers, will need a management system to complement it.

Any ideas or information from you folks would be so welcome!

No, the K-Pro cannot be used in this vehicle. I'm sorry, but we do not offer anything at this time for that engine and vehicle combo.

Thank you for the feedback! Appreciate it! If and when you do come up with a K-Pro for my engine, please let me know. My email address is jbmadrigal@hotmail.com. Butch