Hondata

i finally installed everything on my engine and ready for tuning. So all i need to do is turn to car over. But i noticed i didn't put the chip on the slot. My question is, in which way do i put the chip in. I noticed it has a notch on one side of it. Need to figure this out so i can drive it to tunning? Also, is it safe to drive it or should i tow it?

The chips are sent blank. You will need to contact your tuner or dealer for a basemap. The chip will have to be burned with the basemap before you can drive with it.

Details on installation can be found at http://www.hondata.com/downloads/s200%2 ... manual.doc