Hondata

Posted: **Tue Aug 07, 2007 4:09 pm**

i just install kpro for my 05 rsx.
and i have 2 code. i'm wondering if i should worry about it?
what does those code mean? the tuner told me its fine i shouldn't worry about it... but i don't feel safe. i need you guys to help me out..
BTW at the moment i'm not running the primary 02 sensor.
Po112-IAT sensor low voltage
po661- Intake dual runner manifold low voltage

Thanks in advance.
:D

Posted: **Wed Aug 08, 2007 9:40 am**

What vehicle , ecu and engine do you have?

Posted: **Wed Aug 08, 2007 9:50 am**

Spunkster wrote:What vehicle , ecu and engine do you have?

05 base rsx/k20a3

Posted: **Wed Aug 08, 2007 10:11 am**

Posted: **Wed Aug 08, 2007 4:44 pm**

02-04 type-s ecu.with harness

Posted: **Thu Aug 09, 2007 10:11 am**

You're using a base calibration in a type s ECU. The type s ECU will not drive the secondary intake runners. Your options are to disabled the secondary intake runners or switch to a base ECU.

Posted: **Thu Aug 09, 2007 11:58 am**

Hondata wrote:You're using a base calibration in a type s ECU. The type s ECU will not drive the secondary intake runners. Your options are to disabled the secondary intake runners or switch to a base ECU.

how about the IAT sensor?

Posted: **Thu Aug 09, 2007 12:19 pm**

Do you get the IAT error with your stock ecu?

Posted: **Thu Aug 09, 2007 4:24 pm**

Spunkster wrote:Do you get the IAT error with your stock ecu?

i don't know...
but my tuner told me its normal, he called u Guys and said 05 will throw out that code.. :roll: so, that is why i'm wondering if i should worry about it. BY the way i don't have the 02-04 O2sensor, currently i'm just the 05 O2 sensor.

Posted: **Sun Aug 12, 2007 8:28 pm**

anyone??
chime in...

Posted: **Mon Aug 13, 2007 10:43 am**

You should not receive any errors. You must follow the Helms manual for troubleshooting these errors and use process of elimination. Try your stock ecu.

Posted: **Mon Aug 13, 2007 9:48 pm**

if i were to use 05 primary O2 sensor
will it throw codes?

Posted: **Tue Aug 14, 2007 10:17 am**

You cannot use the 05 sensor. You must use an 02-04 sensor.

Posted: **Sat Aug 25, 2007 12:30 pm**

Spunkster wrote:You cannot use the 05 sensor. You must use an 02-04 sensor.

i just change my IAT and my Primary o2 sensor.
but still get engine light for IAT Low voltage
and 1 more thing i also notice is my a.f graph is very wavey. i would shoot up to 32.x.1(isn't that to lean) and come back down to 14.7.1

i Uploaded k20a3 high octane map.

Posted: **Mon Aug 27, 2007 9:41 am**

Please plug in your stock ecu and see if you continue to have the IAT error.