Page 1 of 1
Getting Booted out
Posted: Mon Jul 16, 2007 5:44 am
by WickedCivicNY
I had an issue the other night on the dyno, As I was in the middle of the pull. Smanager crashed and locked up. In order for me to reconnect I had to Kill the process of Smanager and restart it. Has anyone else ran into issues like this ? Typically I would get booted out on high boost pulls around 37psi..
Any comments or help would be appreciated.
Thanks
Posted: Mon Jul 16, 2007 9:56 am
by Spunkster
What spark plugs are you using? resistor or non-resistor?
Posted: Mon Jul 16, 2007 9:39 pm
by swappedturboej6
how is he so pose to run non-resistor type plugs with 37psi? the coldest non-resistor type is ngk7s.
Posted: Tue Jul 17, 2007 7:18 am
by WickedCivicNY
Spunkster wrote:What spark plugs are you using? resistor or non-resistor?
Its a NGK Non-Resistor Plug #10
Posted: Tue Jul 17, 2007 9:27 am
by Spunkster
That is the problem. You must use resistor type spark plugs. The owners manual for your car actually states this as well.
Posted: Tue Jul 17, 2007 11:02 am
by WickedCivicNY
Spunkster wrote:That is the problem. You must use resistor type spark plugs. The owners manual for your car actually states this as well.
Any recommendations you have on a resistor type plug that has a very cold heat range ? similar to the NGK 10's ?
Posted: Tue Jul 17, 2007 3:16 pm
by Hondata
Posted: Wed Jul 18, 2007 7:44 am
by WickedCivicNY
Excellent .. Thanks a bunch