Prelude H22 fuel map basic mods I/H/E
Posted: Sun May 13, 2007 5:02 pm
Dyno tuned to have 14.0 AFR at low loads, and 13.5 at high loads. Closed loop is turned off.
Engine = H22a4 with OEM head / block / injectors / pistons / ect?
ECU = P72 with S300
Modes = CAI / Mugen header / 2.5" strait pipe / 2.5" catback / removed AC / removed Power steering / underdrive crank and alternator pulley?s.
Use this tune as a good starting point for stock H22?s (you still need to get your car dyno tuned!!) This was on 93 octane.
Engine = H22a4 with OEM head / block / injectors / pistons / ect?
ECU = P72 with S300
Modes = CAI / Mugen header / 2.5" strait pipe / 2.5" catback / removed AC / removed Power steering / underdrive crank and alternator pulley?s.
Use this tune as a good starting point for stock H22?s (you still need to get your car dyno tuned!!) This was on 93 octane.