Hondata

After i have installed on my PC Smanager 1.2.7, uploaded Stock US P30 calibration to S300 i now have a trouble with engine idle speed when cold (to low rpm for cold engine after any seconds after start). I checked Idle speed setting & founded what Celsius & farenheit temperatures seems to be wrong. Please check. When i try to change any temperature value it shows any another value.

-40 celsius is the same as -40 fahrenheit.

Adjust the throttle plate bypass screw to open it up more or increase the IACV duty cycle to get the cold-start fast idle where it needs to be.

Follow the Helms manual for setting the idle with the idle set screw.