Page 1 of 1
UK Civic Type-R EP3 with JRSC and 650cc RC's + datalog graph
Posted: Wed May 02, 2007 4:29 am
by chippyleigh
Hi there, I am after a map for the following :-
UK Civic Type-R EP3
JRSC s/c (civic si race model)
650cc RC injectors
Toda Header
Spoon N1 catback
PRB ecu with wideband lambda
97-98 octane fuel
We have tried using K20a2-rsx-650cc-jrsc-10-psi but are getting knock when revs drop down from 7000 rpm.
On the last run datalogging lambda gave 11.5 to 14.70
Any ideas on a better map would be appreciated.
Darren
Posted: Wed May 02, 2007 9:33 am
by Spunkster
For a setup like this, you will have to tune it on the dyno.
Posted: Thu May 03, 2007 3:04 am
by chippyleigh
Spunkster wrote:For a setup like this, you will have to tune it on the dyno.
I understand this but I wanted another map for this setup until we can get on a dyno, over here in the UK some people are charging over ?400 for a dyno tune (they won't do it by the hour) which is just over $800 so a more suited map to get us by would be appreciated.
I have also noticed that knocks seem to be evident when changing gear, ie when boost drops off that is when knocks are present.
The datalog File :-
Posted: Thu May 10, 2007 8:20 am
by chippyleigh
anybody ??
Posted: Thu May 10, 2007 9:39 am
by scottishpol
Where abouts are you in the UK?
I can get you dyno time at a very reasonable price up here in Scotland.
Posted: Thu May 10, 2007 1:25 pm
by chippyleigh
scottishpol wrote:Where abouts are you in the UK?
I can get you dyno time at a very reasonable price up here in Scotland.
Its for a mate and he lives just north of Manchester.
Re: UK Civic Type-R EP3 with JRSC and 650cc RC's + datalog g
Posted: Mon Oct 08, 2007 9:51 am
by trlaing
chippyleigh wrote:Hi there, I am after a map for the following :-
UK Civic Type-R EP3
JRSC s/c (civic si race model)
650cc RC injectors
Toda Header
Spoon N1 catback
PRB ecu with wideband lambda
97-98 octane fuel
We have tried using K20a2-rsx-650cc-jrsc-10-psi but are getting knock when revs drop down from 7000 rpm.
On the last run datalogging lambda gave 11.5 to 14.70
Any ideas on a better map would be appreciated.
Darren
Hi
Did you ever find a better map for your setup? I have the same JRSC kit with ITG Maxogen air filter, standard exhaust manifold, DC Sports catback. When I received my K-Pro there was a problem with the map so I was told to upload the same one you are using. I haven't driven it yet but it seems to start and rev fine. I have to drive 460 miles to get it mapped so would like a good base map so it survives the journey!
Any help would be much appreciated!
Posted: Mon Oct 08, 2007 8:40 pm
by Teamko
send me datalog and current map I can optimizm your tune.