Page 1 of 1
p06 ecu no vtec output
Posted: Tue Mar 27, 2007 3:18 pm
by Tech3
first time we are using a p06 ecu for b16 engine. we have tried all the outputs for vtec activation. inverted or not. 2 outputs with no relays and 4 with relays. vtec doesnt work with the outputs with no relays. with the outputs that require relays we got the vtec activated but it turns off about 700rpms later and check engine light on dtc 21. we suspect a software glich. please help with this.
Posted: Tue Mar 27, 2007 5:09 pm
by Hondata
Can you post the calibration and a datalog? Is this using the alternate VTEC output? (if so, disable the VTEC spool error check).
Posted: Tue Mar 27, 2007 5:12 pm
by Spunkster
Please also post the version of software you are using from Help, About.
Posted: Tue Mar 27, 2007 6:51 pm
by scttydb411
seems like it's just easier to convert the p06 to p28 and be done w/ it.
Posted: Wed Mar 28, 2007 9:41 am
by Spunkster
If you simply post the version of software you are using, we may be able to determine why you are having the problem and it may as simple to fix as downloading the newest version of software.
Posted: Mon Apr 02, 2007 5:27 pm
by Tech3
Spunkster wrote:If you simply post the version of software you are using, we may be able to determine why you are having the problem and it may as simple to fix as downloading the newest version of software.
version 1.2.3, dont have calibration and datalog onhand..
Posted: Tue Apr 03, 2007 9:18 am
by Spunkster
Current version is 1.2.6.0. Download the newest version.
Posted: Tue Jul 17, 2007 10:20 pm
by Tech3
Spunkster wrote:Current version is 1.2.6.0. Download the newest version.
my bad. we actually were using the latest version 1.2.6.0. we disabled the vtec spool error check too.
Posted: Wed Jul 18, 2007 9:22 am
by Spunkster
Current version is 1.2.7.0