Page 1 of 1
making aem uego work with s300
Posted: Sat Mar 24, 2007 4:45 pm
by fk83
does any one know kow to set it up in computer
Posted: Mon Mar 26, 2007 11:01 am
by Spunkster
IT is exactly like the setup for the PLX wideband, but you cannot run the car in closed loop and use the wideband output at the same time using only one sensor.
http://www.hondata.com/techplxwiring.html
Posted: Mon Mar 26, 2007 6:06 pm
by fk83
are the sensor voltages the same. can you run in close loop and data log tthe o2 thanks
Posted: Tue Mar 27, 2007 9:39 am
by Spunkster
No you cannot. The aEM has only one output. You must choose if you want narrowband or wideband output. IF you choose wideband output, you cannot use that sensor to run the car in closed loop. THis is why we recommend the PLX Devices widebnads, they have both narrowband an wideband at the sametime.
Posted: Sun Apr 08, 2007 1:44 pm
by jordancivic
If you got an AEM and want to run closed loop, use the AEM to ELD input, and use a stock o2 sensor setup as well. ie 2 o2 sensors.
Posted: Tue Apr 10, 2007 1:12 pm
by allanonjj
the voltage offset should be around -.4 . Just do a datalog and match your AF to the gauge.