Hondata

Posted: **Thu Apr 17, 2003 11:51 am**

I purchased this used. Was told it was a 2b w/ datalog, but cannot connect. Tried all port settings (1-4, flowcontrol, FIFO buffer, etc...)
When I select ECU information, I get "communication error"
Sometimes get a popup: "This system does not have datalogging enabled"
Using Hondalogger ver 3.0.8.0

Please excuse the camcorder capture quality.

TIA,
Dave

Ok, pics should work now.

Posted: **Thu Apr 17, 2003 2:32 pm**

no pictures are present

Posted: **Thu Apr 17, 2003 8:49 pm**

stage 2 WITH BOOST AND NO DATALOGGING.

2BN

serial NUMBER SHOULD BE 2BDXXXX

Posted: **Thu Apr 17, 2003 9:28 pm**

Not happy w/ that. But what can I do?? lol
When i received this Hondata, there was a receipt included from Hondata indicating the previous owner had purchased a Max232 Datalogging chip.
Is this not present on the board?

Thanks for the help,
Dave

Posted: **Fri Jun 27, 2003 4:37 pm**

Download the most recent version of Hondalogger, and then go tot the ECU button and make sure you have it set to OBD1 version 2.5

Hondata

Please verify if this is a 2b w/datalog

Please verify if this is a 2b w/datalog