boost control components?

turbotypeR · Post by **turbotypeR** » Tue Jan 09, 2007 6:57 pm

does anyone have the values for the transistors needed to be added to use the boost control? i already have the diode and resistors,just need to make sure i buy the right transistors

QUICKSILVER RACING · Post by **QUICKSILVER RACING** » Wed Jan 10, 2007 9:34 am

Did you take a look at the help file in the Smanager? It's there.

Jan Niemi · Post by **Jan Niemi** » Wed Jan 10, 2007 10:55 am

QUICKSILVER RACING wrote:Did you take a look at the help file in the Smanager? It's there.

I looked...where is the info at in SManager? Couldn't find it.

turbotypeR · Post by **turbotypeR** » Wed Jan 10, 2007 3:55 pm

it just says big transistor and small transistor.no values

QUICKSILVER RACING · Post by **QUICKSILVER RACING** » Wed Jan 10, 2007 11:01 pm

Best thing to do is to to look at another ECU. Part numbers in the s300 help file are vague.

turbotypeR · Post by **turbotypeR** » Thu Jan 11, 2007 3:45 am

only problem is,i don't have another ecu and i am going to the dyno monday and need it to be workling

Post by **Spunkster** » Thu Jan 11, 2007 11:17 am

The boost component kit is $10 and your dealer can install it for you. We do not give out teh individual component information becasue the chance for a person getting the wrong parts and installign them incorrectly is too high.

99% of all s300 problems are due to improper installaions and socketing.

turbotypeR · Post by **turbotypeR** » Thu Jan 11, 2007 6:34 pm

i will be glad to buy the kit but i am going to the dyno monday and i want it working.i used to repair radios,so the installation is no big deal.i already have everything but the transistors.i was hoping somebody could look at theirs and give me the numbers off of it